Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Kensington, PA
We provide independent DuraFlex service across Kensington, PA, for the flexible stainless liners tucked inside this district’s older brick rowhouses. The one thing that shapes our DuraFlex work here more than anywhere else is this: your chimney is probably shared with the attached house next door, one masonry stack serving two addresses. That changes how a cleaning, a cap job, or a reline gets done. From a Level 2 inspection to a top-plate reseal to a full liner replacement, one chimney specialist handles it start to finish. Call (833) 962-9222 for a free estimate.
Why Kensington Residents Choose Us for DuraFlex Service
DuraFlex is one of the flexible stainless relining systems we handle most often in Kensington, and we know it from the inside of the flue, not from a sales sheet. That familiarity matters in 19134 rowhouses, where a liner has to fit a narrow coal-era flue, seal at the top plate, and connect cleanly at the bottom tee without kinking at an offset bend. We are an independent chimney shop, not affiliated with or authorized by the manufacturer, so our only loyalty is to what actually fits your stack and vents safely.
We use genuine DuraFlex liner, tee, top plate, and cap components where they’re still available, and quality aftermarket stainless or appliance connectors where OEM isn’t practical. We don’t guess at repair vs. replace. If a liner is crushed, kinked, or separated at the tee, we tell you plainly, with camera evidence you can watch on the monitor yourself. That photo report comes with the inspection, and the sweep price is agreed before we book the visit.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Kensington
Most of what we find in Kensington ties back to the shared stack, the age of the brick, and decades of freeze-thaw on the roofline. Here are the DuraFlex problems we run into again and again:
- Failed top-plate sealing. An insulated DuraFlex liner installed without a properly sealed top plate lets rainwater run down the outside of the liner and into the flue. In Kensington, where mortar crowns have spalled over decades of Philadelphia freeze-thaw, this is a recurring source of water intrusion and rusted liner surfaces. We reseal or rebuild the plate and correct the crown above it.
- Kinked ovalized liners in narrow flues. Coal-era flues are tight. An ovalized DuraFlex liner can crush or kink at an offset bend, restricting draft and trapping creosote in a section that’s nearly impossible to sweep without pulling the appliance connection. When that bend is deformed, cleaning alone won’t fix the venting.
- Separated bottom tees and corroded connectors. Flexible liner joints and appliance connectors on older DuraFlex installs corrode or separate at the bottom tee. Exhaust then goes into the chimney chase instead of up the flue. On a party-wall chimney serving two addresses, that’s a real carbon monoxide risk, not a nuisance.
- Bird and raccoon nesting in uncapped flues. Uncapped or poorly capped DuraFlex flues make easy nesting sites. The nesting debris plus a partly blocked liner is a standard early-heating-season call in Kensington once the weather turns and homeowners light the first fire.
- Abandoned and jerry-rigged flues in converted housing. Rear additions and former industrial buildings converted to housing add irregular, often undocumented flue runs. When a flue was capped for coal and later rigged for gas, the DuraFlex reline has to be verified, not assumed.
DuraFlex Service in Kensington: What Local Conditions Mean for Your Equipment
Here’s the local fact that most affects a DuraFlex job in Kensington: on tightly attached rowhouse blocks, the shared chimney often serves two addresses through a single masonry stack. That means any reline, cap installation, or repair on your side has to be coordinated with the attached neighbor before work begins, for access to both sides, for the cap over the shared flues, and for how the top plate is sealed across the whole crown. A straightforward scenario shows how this plays out. A homeowner on a dense 19134 rowhouse block notices a drafty fireplace and staining on the ceiling near the chimney. A Level 2 inspection usually reveals a DuraFlex liner whose top plate seal has failed and whose bottom tee has separated, letting water and flue gases escape into the shared chase. Because the stack is shared with the attached neighbor, a qualified local pro typically coordinates access on both sides, then reseals or replaces the liner, installs a proper multi-flue cap, and addresses the spalled crown and cracked mortar above the roofline before heating season. Detached suburban housing rarely runs into this; Kensington rowhouses run into it constantly.
DuraFlex Models & Products We Service in Kensington
We install, service, inspect, and repair the kinds of DuraFlex products found in Kensington’s rowhouses: the single-wall DuraFlex SS Flexible Chimney Liner, the DuraFlex Insulated Flexible Liner Kit, the DuraFlex Oval Flexible Liner used in tight coal-era flues, and the DuraFlex Reline Cap and Top Plate assemblies that seal the top of the system. As an independent shop, we’re not a factory outlet, and we don’t claim to be the manufacturer’s authorized service. What we do is choose components that fit your flue, your appliance, and your stack, then verify the assembly vents correctly from bottom tee to roofline.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Kensington
DuraFlex work in Kensington is priced per job by a written estimate after we’ve seen the flue, because a sweep in a single straight liner and a reseal on a shared party-wall stack are very different jobs. Nothing gets recommended without camera evidence you can review yourself, and we’ll tell you plainly when a piece of work can safely wait.
- Annual chimney sweep and Level 1 check: a flat-price sweep, agreed before booking.
- Level 2 inspection: camera inspection and photo report included.
- Top-plate reseal or cap installation: quoted after inspection of the crown and flue tops.
- Liner repair or replacement: priced per job once the liner condition and flue dimensions are confirmed.
Waterproofing, crown repairs, and structural masonry are quoted the same way, by written estimate. The estimate is free. Call (833) 962-9222 to set one up.
Serving Kensington, PA – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Kensington
Yes, in most cases a DuraFlex liner can be installed for your address alone inside a shared party-wall stack, but it takes coordination with the attached neighbor first. Because the flues and the crown are shared, access, capping, and top-plate sealing usually touch both sides of the roofline, so we confirm who else uses the stack before work is scheduled. Call (833) 962-9222 for a free estimate on your shared Kensington chimney.
A Level 2 camera inspection is how you know. It shows whether the top plate is sealed against water, whether the liner is kinked at any offset bend, and whether the bottom tee is connected and intact. In Kensington’s older rowhouses, poorly sealed top plates and separated tees are the two failures we see most. Call (833) 962-9222 to book an inspection with a photo report you keep.
Because the cap is either damaged, undersized, or not actually covering every flue in a multi-flue stack. Shared party-wall chimneys in Kensington often have several flues, and a cap fitted to one opening leaves the others open to nesting. We inspect the cap and flue tops, clear out debris, and fit a proper cap that covers the whole assembly. Call (833) 962-9222 for a free estimate.
Freeze-thaw weather stresses the masonry around the liner more than the stainless itself. Philadelphia’s cold winters and humid summers beat on the crowns and mortar on aging rowhouse chimneys, so spalled mortar, cracked crowns, and water intrusion into unlined flues become recurring spring and fall issues. A sealed top plate and a sound crown protect the DuraFlex system underneath. Call (833) 962-9222 to have both checked before heating season.
A Level 1 inspection is a visual check of the accessible parts of the system, appropriate when you’re just maintaining a chimney that’s already working. A Level 2 inspection goes further with a camera through the flue, which is what you need before a DuraFlex reline or when you’ve had a failure. For an older Kensington rowhouse or a recent purchase, the Level 2 is the one that tells you the truth about the liner. Call (833) 962-9222 for a free estimate.
Service Areas Near Kensington
We provide independent DuraFlex service in Kensington and the surrounding neighborhoods: Port Richmond to the east, Frankford to the northeast, and West Philadelphia, Overbrook, and Merion Station to the west. If you’re on a shared rowhouse stack in one of these areas, the same party-wall coordination applies. Call (833) 962-9222 to check coverage for your address.
Book Your DuraFlex Service in Kensington Today
Whether it’s a routine sweep, a Level 2 inspection, a cap installation, or a liner replacement, our chimney specialist handles every phase of DuraFlex work in Kensington. Call (833) 962-9222 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Frankford.