Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Frankford Homeowners Choose DuraFlex Chimney Cleaning
We provide independent DuraFlex chimney cleaning and service in Frankford, PA. That means we’re not tied to DuraFlex as a manufacturer, but our technicians work on their flexible stainless liners and components routinely and know the ways these systems typically fail in this city’s housing stock. Frankford’s rowhouse chimneys are old and unforgiving, and a DuraFlex liner installed a decade or more ago is usually dealing with moisture, creosote, or both. We’re an independent DuraFlex service provider, so we can give you an honest read on what your liner actually needs.
Chimney Sweep Frankford handles the full chimney lifecycle on these systems: sweep, Level 2 inspection, cap and crown work, liner repair, and full reline when a section is beyond saving. Chimney work is all we do, so we diagnose the system rather than the symptom. Call (833) 962-9222. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Chimney Sweep Frankford for Your DuraFlex Chimney Cleaning?
Our technicians have up to 15 years of experience working on flexible stainless liners, and DuraFlex equipment crosses our path often in Frankford because it shows up on a large share of the older Philadelphia rowhouse chimneys in the area. That familiarity matters less than what we do with it: knowing that a corrugated stainless liner traps creosote differently than a smooth clay flue, that seam corrosion in a wet masonry chimney is a real risk over time, and that a top plate that was never secured properly is going to show up as a rattling flue before it ever becomes a fire hazard.
We use quality parts that fit DuraFlex equipment. That means top plates, appliance connectors, and cap hardware matched to the liner you actually have, not generic hardware that barely seals. When a DuraFlex-specific component is the right fit for code compliance, we go that direction. When a non-structural piece can be handled with quality aftermarket stainless hardware, we’ll say so and explain the tradeoff.
Service is done in a warranty-safe way. We don’t guess at what a manufacturer’s guidelines require, and we document what we found with camera inspection and a photo report, so you have a record of the condition of the liner before and after we touch it. Every job is a chimney or fireplace job. That focus means we catch failures a generalist wouldn’t.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Fix in Frankford
The Frankford rowhouse stock is where most DuraFlex problems show up sharply. Many chimneys here date to the 1880s through the 1920s, built for coal and then retrofitted for oil, gas, and wood over a century of change. Flues are often parged and crumbling, offsets are soot-caked, and the liner inside is doing work the original chimney was never built for. Here’s what we find:
- Corrosion and pitting along the corrugated seams. Nothing eats at a flexible stainless liner like moisture sitting in an acidic flue. In Frankford’s older masonry chimneys, flue gases stay wet longer than in a newer vented system, and gas appliances venting into an oversized flue make it worse. Seam pitting starts small and spreads.
- Liner sagging or separation from the top plate. Years of thermal cycling pulls on a liner that wasn’t secured properly at the crown. A sagging liner restricts draft and can pull free of the appliance connector below. This is one of the most common failures we find, and one of the most fixable if it’s caught early.
- Creosote packed into the corrugations. A flexible liner’s corrugations trap creosote in a way a smooth clay flue doesn’t. Regular wood burning packs it in, and it hardens over the heating season. Left alone, it raises chimney fire risk every time you light a fire.
- Crown and flashing leaks letting water run behind the liner. Nor’easters and summer downpours push water into uncapped flues here, and Philadelphia’s freeze-thaw winters crack and spall the soft mortar around them. Water runs down behind the liner, rusts the top section, and often shows up as staining on interior walls near the fireplace or furnace vent before the owner has any idea what’s causing it.
- Shared party-wall flues causing unexpected problems. On the tight rowhouse blocks off Frankford Avenue and near the old Arsenal, flues are often shared between adjoining homes. A DuraFlex liner installed on one side can change the draft on the other, and access to the top often means going through a rear alley or over a shared flat roof to reach the stack.
DuraFlex Parts & Our Repair-vs-Replace Approach
We choose parts for fit and durability, not convenience. DuraFlex-specific OEM components are preferred when we’re replacing a damaged top plate, cap, or appliance connector, because they’re built to match the liner and satisfy code requirements. For non-structural bits like cap hardware, quality aftermarket stainless is often a reasonable choice, and we’ll tell you why. We’re not a DuraFlex dealer and we don’t claim to stock their parts in any dedicated way. We source what fits.
The bigger question is usually repair versus replace. Where the liner is perforated or the seams are split beyond a short section, patching is a short-term fix and relining or replacing the liner run is usually the more honest answer. Where the problem is a damaged top plate, a pulled connector, or a short section of a sound liner, repair is reasonable and often cheaper than a reline you don’t need. We explain the tradeoff in plain terms and show you the camera evidence so you can judge for yourself. If work can safely wait, we say so. Call (833) 962-9222 for an exact quote. Estimates are free.
Our DuraFlex Service Process – Step by Step
- 1
Level 2 inspection first. Before we sweep anything, we run a camera inspection of the liner. We’re looking for seam corrosion, sagging, separation at the top plate, and how much creosote is packed into the corrugations. You get a photo report of what we find.
- 2
Diagnosis specific to DuraFlex systems. Not every smoky draft means the liner is failing. We check the crown and flashing for water entry, confirm the liner is secured at the crown, and look at the appliance connector below. What we find determines whether we’re sweeping, repairing, or talking about a reline.
- 3
Sweep or repair. A poly brush sized to the liner clears the corrugations without damaging the stainless. Where repair is needed, we re-secure or replace the top plate, check the cap and crown for water entry, and replace any damaged connector or hardware with parts that fit.
- 4
Test after service. We confirm draft at the appliance and check the top end for leaks or loose hardware before we leave. A second photo report documents the final condition.
- 5
Warranty and documentation. We give you a clear written record of what was done and the condition of the liner, which matters if you ever need to make a warranty claim. Nothing is recommended without evidence you can look at yourself.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Products We Service & Install in Frankford
DuraFlex makes a flexible stainless steel chimney liner, and we service and install the flex liner configurations that show up in Frankford rowhouse chimneys. That includes 6″ and 8″ round stainless liner kits used for wood and gas venting, insulated liner kits for chimneys where the flue needs the extra protection, ovalized flexible liners for tight or offset flue runs, and furnace and appliance connector liners that tie a gas or oil appliance into the chimney safely. If you’re not sure which configuration is on your chimney, the Level 2 inspection tells us. Ovalized liners are common in the older Frankford chimneys where a round liner won’t clear the offsets, and getting the sizing right is the difference between good draft and a liner that fights you every heating season. We don’t claim to stock any of this in a warehouse. We source what fits your chimney.
We Also Service These Brands
DuraFlex is one brand among several we work with. We also service HeatShield, the ceramic liner repair system used as an alternative to full relining, and Gelco, along with Olympia Chimney, Famco, and Copperfield. That matters when a DuraFlex liner isn’t the right answer for a particular flue. We’re not locked into one manufacturer, so we recommend the system that fits your chimney, not the one we happen to favor. Full-service coverage means you don’t need a second contractor for a different brand.
FAQs – DuraFlex Chimney Cleaning Service in Frankford
No. We’re an independent DuraFlex service provider, not authorized, certified, or affiliated with the manufacturer. We work on DuraFlex liners and components because they’re common in Frankford, not because of any official relationship. What we offer is technical experience with these systems, not a manufacturer’s stamp of approval. Call (833) 962-9222 for an exact quote. Estimates are free.
Yes. We use DuraFlex-specific OEM components for top plates, caps, and appliance connectors when replacement is needed, because fit and code compliance matter on those parts. For non-structural items like cap hardware, quality aftermarket stainless is often a sound choice. We’re not a DuraFlex dealer and don’t claim to stock their parts, but we source what fits your liner correctly. Call (833) 962-9222 for an exact quote. Estimates are free.
Most DuraFlex service visits, including the Level 2 inspection, sweep, and top-end check, finish in a single appointment. Repairs like a top plate replacement or short section work add time, but usually stay within the same visit. A full reline takes longer. We give you a realistic time estimate when we book the job. Call (833) 962-9222 for an exact quote. Estimates are free.
We service and install the flexible stainless liner configurations DuraFlex makes, including standard round liner kits, insulated liner kits, ovalized flexible liners for tight flue runs, and furnace and appliance connector liners. If you’re not sure what’s on your chimney, the Level 2 inspection identifies it. Call (833) 962-9222 for an exact quote. Estimates are free.
Proper service done to a liner’s guidelines doesn’t void a warranty. Damage from improper sweeping, wrong-sized brushes, or unrepaired water entry can. We work warranty-safe, document the condition of the liner with a photo report before and after, and give you the written record you’d need to file a claim. If something we find looks like it falls under a warranty, we’ll tell you so you can pursue it. Call (833) 962-9222 for an exact quote. Estimates are free.
We don’t quote DuraFlex cleaning by phone before seeing the chimney, because a rowhouse flue with packed corrugations and water entry is nothing like a simple sweep. Pricing is set per job by a free written estimate, given after the Level 2 inspection. If the liner shows only seam corrosion on a short section, a repair-plus-sweep may be the sensible path. If the seams are split, a reline is the honest answer. Nothing is recommended without camera evidence you can see. Call (833) 962-9222 for an exact quote. Estimates are free.
Book Your DuraFlex Service in Frankford, PA
If you have a DuraFlex flexible liner and a smoky draft, a rattle at the top of the flue, or water staining near your fireplace, we can find out why. We’re the specialist for the diagnosis, not just the sweep. Call Chimney Sweep Frankford at (833) 962-9222. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Chimney Sweep Frankford.