Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Tacony
If your Tacony rowhouse has a crumbling crown or a cap that’s rusted through, you’re in the right place. We handle chimney cap and crown work for the two- and three-story brick rowhouses that line these blocks, from a simple cap swap to a full crown rebuild and everything in between. Our technicians have up to 15 years of experience, and we know why the stacks on Tacony’s older homes fail the way they do. Call (833) 962-9222 to get an estimate booked.
Why Tacony Homeowners Call Chimney Sweep Frankford for Chimney Cap & Crown
Chimney work is all we do. That singular focus matters on Tacony’s older rowhouses, where a cracked crown or a failing cap is usually the visible symptom of something happening deeper in the flue. A general handyman sees a chipped piece of mortar. We see a stack taking on freeze-thaw water.
Tacony’s rowhouse stock dates largely to the 1880s through the 1920s, when the neighborhood was a company town for Tacony Iron Works and the nearby mills. That history is still sitting on the roofs. Most chimneys here are original brick stacks with multiple terra-cotta flues that once served parlor stoves and coal grates. Many of those flues now vent a gas insert or oil furnace, often with no liner to modern standards. We’ve spent enough time on these blocks to know what we’re walking into before we climb up.
That’s the local knowledge that matters here. A cap that fits one chimney won’t fit the shared party-wall stacks the same way. A crown that looks sound from the sidewalk often hides spalling underneath. We diagnose the whole system, not just the part that caught your eye.
We keep the work straightforward: a flat-price scope agreed before we book, and a camera inspection with a photo report included so you can see what we’re seeing. Nothing gets recommended that you can’t verify for yourself. When a crown can safely wait a season, we’ll tell you that too.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Tacony
From a custom cap on a single flue to a multi-flue cap over a full rowhouse stack, this is the work we do every week. Here’s how each service plays out on Tacony’s brick chimneys.
Cap Installation
An uncapped flue takes in rain, snow, birds, and squirrels, and it loses heat up the stack when the fireplace is idle. On Tacony’s older chimneys, where the terra-cotta tiles are already weathered, keeping water out is half the battle. We size the cap to the actual flue opening, not a one-size-fits-all piece from a shelf, so it seals tight and sheds water the way it should.

Cap Replacement
Rusted or bent caps are common on the brick stacks here, especially where they’ve taken wind and weather for years without a repair. A failed cap lets water pour straight into the flue and can leave the whole stack vulnerable. We match the new cap to the chimney’s dimensions and the appliance it serves, so venting works the way it was designed to.

Crown Repair
The crown is the concrete or mortar cap at the very top of the brick. When it cracks or spalls, freeze-thaw water gets into the flue tiles below. Philadelphia’s winters do a number on a crown that’s already worn, and we see plenty of cracked crowns on the exterior-side stacks that sit exposed to the weather. We repair the crown while checking that the damage hasn’t spread into the brickwork.

Crown Coating
A sound crown with surface wear can often be protected rather than rebuilt. Crown coating seals the top against water while leaving the structure underneath intact. It’s a good fit when the camera inspection shows the crown is still solid but the surface is breaking down, and it can head off a larger repair down the line.
Trusted Brands We Service in Tacony
We work with the professional-grade product lines chimney pros trust, including HeatShield, Gelco, Olympia Chimney, and Famco. These aren’t the pieces you’ll find in a big-box aisle. They’re the materials chosen for a job that has to hold up through years of freeze-thaw cycles and humid summers. When a cap, crown, or liner repair calls for HeatShield’s restorative process, we can handle it; that’s a specialist capability a sweep-only outfit won’t have. We don’t carry an inventory on a truck. We source what the job needs and get it to your chimney without delay.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Tacony Homes
These are the failures that come up again and again on Tacony’s older rowhouse chimneys.
- Spalling, cracked crowns on exterior-side brick stacks. When the crown breaks down, freeze-thaw water works into the flue tiles below. Left alone, a small crack becomes a real leak into the mortar and brick.
- Coal-era terra-cotta flues cracked from decades of coal-then-oil-then-gas use. These tiles have taken on heat and moisture for generations and often fail a camera inspection even when the stack looks fine from the ground.
- Downdrafts off the Delaware River flats. An uncapped or undersized cap on a shared party-wall chimney lets wind push smoke back into the rooms on gusty days. The fix usually starts with the right cap.
- Modern furnaces venting into stacks never meant for them. On blocks off Torresdale Avenue and near the old Disston saw works, it’s common to find a furnace venting through an unlined flue that once served a coal grate. That setup can pass a visual check and still fail a camera inspection nine times out of ten.
Pricing for Chimney Cap & Crown in Tacony, PA
Here’s a realistic picture of what cap and crown work runs in Tacony’s market. A typical cap installation runs $250 – $600, depending on flue size and whether it’s a single-flue or a custom cap. Cap replacement on an existing stack usually lands in the same range. A crown repair runs $350 – $850, and a crown coating sits lower, around $250 – $500. Multi-flue caps over a full rowhouse stack cost more because there’s more to cover and fit precisely.
What moves the price: the number of flues, the size of the crown, whether the stack is exterior-side or central, and how much masonry repair the crown work uncovers. We set a flat-price scope before we book, and the written estimate sets the final price. The estimate is free, and nothing is recommended without camera evidence you can review. Call (833) 962-9222 to book yours.
We Also Serve Cities Near Tacony
We work across the neighborhoods around Tacony, and the same older rowhouse chimneys show up in each one. If you’re nearby in Mayfair, Oxford Circle, Frankford, or Fox Chase, the brick stacks and coal-era flues are much the same story. We serve Tacony and these surrounding communities with the same full-system approach: inspection, camera evidence, and a clear recommendation before any work begins.
Serving Tacony, PA – Our Local Coverage Area
We serve Tacony and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Tacony
Not usually. A coal-era terra-cotta flue was sized and built for a coal grate, not a modern furnace, and without a liner the combustion gases and heat can damage the tile and put the stack at risk. A camera inspection shows whether the tiles are cracked or sound, and that’s what tells us whether a liner is needed. Call (833) 962-9222 for an exact quote, and we’ll show you the camera evidence before recommending anything.
A downdraft pushing smoke back into the rooms usually points to an uncapped, undersized, or poorly fitted cap, and the Delaware River flats make it worse on gusty days. The stack itself may also be short for the surrounding rooflines. A properly sized cap or a custom cap fixes the wind problem in most cases. Call (833) 962-9222 to get an estimate booked.
It comes down to how much of the crown is still sound. If the surface is wearing but the structure underneath is solid, a crown repair or coating usually does the job. If the crown has cracked through and water has gotten into the flue tiles, a rebuild may be the right call. The camera inspection and a close look at the crown decide which way to go. Call (833) 962-9222 for a free estimate.
Once a year is the standard for a chimney in regular use, and on Tacony’s older uncapped or unlined stacks it’s worth taking seriously. Philadelphia’s freeze-thaw winters and humid summers are hard on old brick, and a small crown crack can turn into flue damage in a single season. An annual inspection catches problems while they’re still small. Call (833) 962-9222 to schedule yours.
No, and we won’t guess. Whether a chimney needs a custom cap or a standard multi-flue cap depends on the actual flue dimensions and the shape of the stack, and that’s something we measure on site. A camera inspection and a look at the crown come first, then a written estimate. Call (833) 962-9222 to book the visit and see the evidence for yourself.
Ready to get your Tacony chimney sorted? Call (833) 962-9222 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. Cap and crown work is booked ahead, so the sooner you call, the sooner we can get eyes on your stack. Our chimney cap & crown team handles the whole job, from inspection to the finished cap.
Written by the team at Chimney Sweep Frankford.