Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Liner & Rebuild Across Kensington
If you own a rowhouse in Kensington, your chimney probably wasn’t built for what’s venting into it today. Most of the brick stacks on these blocks went up for coal stoves, and a century later a gas furnace or water heater is breathing through a flue that was never lined for it. That’s the work we do here: diagnosing what’s actually inside the stack, showing you the camera footage, and rebuilding or relining only what the evidence says needs it. Call (833) 962-9222 and we’ll book a visit.
Why Kensington Homeowners Call Chimney Sweep Frankford for Chimney Liner & Rebuild
Chimney work is all we do. Every job is a chimney or fireplace job, which means we read flue problems the way a generalist can’t. On a Kensington block, that difference matters: a handyman looks at a cracked crown and patches it, while we camera the flue, check what appliance is venting where, and figure out whether you’re looking at a liner issue, a blockage, or a masonry problem wearing a liner costume.
We work with the professional-grade lines chimney technicians actually use, including DuraFlex, HeatShield, Gelco, and Olympia Chimney, and we can resurface a sound clay tile flue with HeatShield instead of tearing it out when that’s the right call. That restorative option is one many sweep-only companies simply can’t offer. Our technicians have up to 15 years of experience, and because inspection, cleaning, repair, and rebuild all run through the same specialist team, you’re not handing a half-finished liner job to a second contractor.
Kensington calls tend to be diagnostic-heavy, and we plan for that. We serve the rowhouse blocks around Kensington and the neighboring streets regularly enough that shared party-wall chimneys and coal-era flues aren’t a surprise to us. Nothing gets recommended until you’ve seen the camera evidence yourself. Getting to you is straightforward: we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Liner & Rebuild Services in Kensington
Flexible Liner in Kensington
A flexible stainless liner is usually the answer when a Kensington flue is unlined or the clay tile has failed. It’s sized to the appliance venting into it, brand-matched to DuraFlex or Olympia Chimney, and it solves the venting problem without demolishing brick. On these narrow two- and three-story rowhouses, a flexible liner is often the only realistic path because there’s no room to rebuild the internal flue from scratch.
Liner Repair in Kensington
Not every failed flue needs a new liner. When the existing clay tile is structurally sound but the joints are cracked or the parging has broken down, HeatShield resurfacing restores the flue from the inside. In a shared party-wall stack, that matters: a failed parging job on one side can push combustion gases through the masonry into the adjoining unit, so getting the repair right protects both addresses.
Liner Replacement in Kensington
When the old liner is beyond resurfacing, replacement means pulling the failed material, verifying the flue’s condition, and installing a correctly sized stainless system. Kensington’s coal-era flues were frequently undersized for the gas appliances now vented into them, so sizing gets checked against the appliance, not guessed. If a capped second flue sits dormant in the same stack, we check that too before anything gets sealed.
Partial Rebuild in Kensington
Freeze-thaw winters and humid summers beat on the mortar crowns and brickwork of these rowhouse chimneys, and spalling mortar above the roofline is a recurring spring and fall issue. A partial rebuild handles the damaged section from the crown down to sound masonry, so water intrusion doesn’t undo a new liner before the next heating season. We repair cracked crowns in the same visit when the camera and roof check support it.
Trusted Brands We Service in Kensington
We install and work with DuraFlex, HeatShield, Gelco, and Famco, the professional-tier products chimney technicians rely on rather than stock pulled from a big-box shelf. We don’t claim to keep parts sitting in a warehouse; what we do is size the right component for your flue and appliance, then book the installation. If your Kensington chimney needs a stainless flexible liner, a HeatShield ceramic resurfacing, or a brand-matched component from Gelco or Famco, we spec it against what the camera shows. Fast turnaround on scheduling, and one team from inspection through finish.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Liner & Rebuild Problems We See in Kensington Homes
The honest starting point for any Kensington chimney is that this is one of Philadelphia’s oldest rowhouse districts, and the chimney stock shows it. Thousands of narrow brick rowhouses here were built with shared party-wall chimneys for coal stoves, then jerry-rigged for gas or abandoned entirely. Cleaning and diagnostic work here is less about suburban wood-burning fireplaces and more about obsolete, unlined flues in tightly attached brick where the failure mode isn’t cosmetic.
- Shared party-wall stacks with only one side addressed. A chimney can serve two addresses at once, so relining one side without checking the adjoining flues leaves an open path for carbon monoxide through the masonry. We coordinate with the neighbor before capping or relining, because the shared stack doesn’t belong to just one household.
- Coal-era flues now venting gas appliances. Many of these flues went up unlined, and a gas furnace or water heater vented into an unlined stack is a real risk. Old clay tile cracked by freeze-thaw only makes it worse, letting water into a flue that was already undersized.
- Cracked crowns and spalling mortar. Philadelphia’s freeze-thaw winters and humid summers work on aging brick and mortar crowns every year, so water intrusion into unlined flues shows up as a spring and fall issue right before heating season. Catching a cracked crown early is cheaper than rebuilding the stack.
- Nests and dormant-flue debris misread as liner failure. Invasive birds and raccoons nesting in uncapped flues is a standard call once heating season starts, and decades of debris packed into a capped stack can look like a liner problem when it’s actually a blockage and first-degree creosote behind it. The camera tells you which.
Pricing for Chimney Liner & Rebuild in Kensington, PA
Kensington pricing runs on the modest side for Philadelphia, but shared party-wall chimneys add coordination that a standalone suburban house never needs. A typical flexible stainless liner in Kensington runs roughly $2,000 to $4,500, depending on flue height, appliance size, and whether the shared stack requires neighbor coordination. HeatShield liner resurfacing is usually a bit less, in the $1,400 to $3,000 range, when the clay tile is sound enough to restore. Partial rebuilds of crowns and damaged masonry above the roofline typically land between $1,800 and $6,000, and a full chimney rebuild climbs from there. A stated estimate is always free, and the written estimate sets the final price. Nothing is recommended without camera evidence you can see for yourself, and we’ll tell you plainly when work can safely wait. Call (833) 962-9222 for an exact quote.
We Also Serve Cities Near Kensington
We work the same rowhouse stock and the same shared-stack problems throughout the neighborhoods around Kensington. If you’re in Port Richmond, Frankford, Hunting Park, or Olney, our chimney liner & rebuild team covers your area too, and the diagnosis is much the same: an older flue, an appliance venting into it, and a camera that tells the truth. Reach out and we’ll book a visit to your block.
Serving Kensington, PA – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Liner & Rebuild in Kensington
Yes, in most cases we can reline just your side, but only after we camera both sides of a shared party-wall stack. On these tightly attached blocks the chimney frequently serves two addresses, and relining one side without checking the adjoining flues can leave a path for carbon monoxide through the masonry. We coordinate with the neighbor before anything is capped or relined so both households know what the camera found.
Often it can be resurfaced rather than rebuilt, provided the existing clay tile is still structurally sound. HeatShield ceramic resurfacing restores a flue with cracked or deteriorated joints from the inside, and it’s a restorative alternative to full relining that many sweep-only companies can’t offer. If the camera shows the tile has failed structurally, a full liner replacement or rebuild is the honest answer instead. Either way, you see the footage before we recommend the fix. Call (833) 962-9222 for an exact quote.
Philadelphia’s freeze-thaw winters and humid summers are hard on aging brick and mortar crowns, so spalling mortar and cracked crowns are a recurring spring and fall issue on these rowhouse chimneys. Water gets into small cracks, freezes, and widens them, and an unlined or poorly sealed flue lets that moisture do more damage inside. Repairing the crown before it fails protects the flue below it.
Not safely into an unlined or undersized one. Many Kensington flues were built for coal stoves, and a gas appliance vented into a stack never designed for it is an actual risk, especially when the clay tile has cracked from freeze-thaw. The appliance needs a correctly sized liner, and the camera shows whether the existing tile can be resurfaced or has to be replaced. We’ll tell you straight which it is. Call (833) 962-9222 for an exact quote.
Usually not. Invasive birds and raccoons nesting in uncapped flues is a standard call once heating season starts, and decades of dormancy can pack a capped stack with debris and first-degree creosote that looks like a liner problem from the outside. A camera inspection separates a blockage from a genuine liner failure, and we’ll cap the flue afterward so it doesn’t happen again.
From annual sweep to full liner rebuild, one specialist handles a Kensington chimney start to finish. Whether it’s a flexible liner, a HeatShield resurfacing, a partial rebuild, or a shared party-wall stack that needs both sides checked, we diagnose the system, not just the symptom. Call (833) 962-9222 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Frankford.