Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Frankford Homeowners
A missing or rusted-through cap is the single fastest way for water, squirrels, and downdrafts to get into a Frankford chimney, and a hairline crack in the crown is how freeze-thaw cycles turn a small repair into masonry work. Our technicians have up to 15 years of experience reading exactly that kind of damage, and chimney work is all we do, which means we see problems generalists miss. We install and replace caps and repair crowns the same day when the schedule allows, using professional-grade lines like Gelco, Olympia Chimney, and Famco. Call (833) 962-9222 to book a free estimate. We answer 24/7.

What Our Chimney Cap & Crown Service Includes
Caps and crowns protect two different parts of the same system, and the fix depends on which one has failed. Here’s what each part of the job involves.
Cap Installation
A chimney cap is the fitted cover that sits over the flue opening, keeping rain, snow, leaves, birds, and squirrels out of the flue while still letting smoke and combustion gases escape. You need one when a flue is open to the sky, when animals are getting in, or when water is running down the inside of the chimney. We measure your flue, match the cap to the flue size and shape, and secure it to the crown so wind can’t shift it.
Cap Replacement
Replacement is for a cap that’s already there but no longer doing its job: rusted through, dented, loose, or missing its mesh screen. A failing cap lets water in and pests through even though it looks like it’s covering the flue. We pull the old cap, inspect the flue and crown underneath for damage the failed cap let in, and fit a new one sized to your chimney.
Crown Repair
The crown is the concrete or mortar slab at the very top of the chimney that sheds water away from the masonry below it. When it cracks or crumbles, water gets into the brick and freeze-thaw cycles in a Pennsylvania winter widen those cracks season after season. We repair crowns with a proper mortar mix shaped to shed water, and we rebuild badly deteriorated crowns rather than skimming over a failing surface.
Crown Coating
Crown coating is a protective sealant applied over a sound crown to keep water from working into the concrete and mortar joints. It’s the right call when the crown is intact but showing surface wear and you want to stop the problem before it starts. We clean and prep the surface first, because a coating over dirt or loose material won’t bond and won’t last.
Multi-Flue Cap
A multi-flue cap covers several flue openings under one single unit, common on older Frankford rowhouses and larger chimneys with more than one flue. It’s the cleaner solution when you have multiple flues close together and want one solid, weather-tight cover instead of several separate caps. We build these to the exact footprint of your chimney top so the fit is snug and the unit doesn’t rock.
Custom Cap
Some chimneys don’t fit a standard size: odd flue shapes, oversized openings, or a top that’s out of level after years of settling. A custom cap is fabricated to the measurements of your specific chimney rather than trimmed to fit. We take the measurements on-site and have the cap made so it seats correctly and protects the full flue opening.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We work with professional-grade product lines because they hold up to the weather and the heat cycling that a Frankford chimney sees year after year. That includes Gelco and Olympia Chimney caps, both of which we fit and service regularly and know where they tend to wear first, whether it’s the mesh, the mounting, or the seal at the crown.
We also work with Famco components and HeatShield for crown and liner-adjacent repairs, which matters when a crown problem has let water into the flue and the liner needs attention too. We’re not a big-box reseller, so the materials we bring are the ones chimney techs actually use on the job. Whether you have a Gelco cap, an Olympia Chimney unit, or any other make, we can help.
Signs You Need Chimney Cap & Crown Right Now
- Water in the firebox after rain. If you’re finding dampness, rust stains, or a musty smell in the firebox, the cap or crown is letting water in somewhere. Left alone, that water works into the masonry and the liner.
- A cracked or crumbling crown. Visible cracks, spalling concrete, or chunks missing from the top slab mean the crown can’t shed water anymore. That’s the start of a much bigger masonry repair if it’s not addressed.
- Animals or nesting material in the flue. Birds and squirrels get in through an open or damaged cap and build nests that block the flue. A blocked flue is a carbon monoxide and chimney fire risk, so this one shouldn’t wait.
- A rusted, loose, or missing cap. A cap that’s rusted through, sitting crooked, or gone entirely isn’t protecting anything. The flue is open to weather and wildlife until it’s replaced.
- White staining or efflorescence on the chimney exterior. That chalky white residue on the brick is a sign moisture is getting in and working its way out through the masonry. The crown is a common source, and it’s worth a look before winter.
Our Chimney Cap & Crown Process – Step by Step
- 1
Full inspection first. We look at the cap, the crown, the flue, and the masonry below before we recommend anything. A cap problem and a crown problem can look similar from the ground, and the fix is different for each.
- 2
Camera inspection of the flue. A camera run down the flue shows us whether water or debris has already gotten past the cap and into the liner. That’s how we tell you whether the job is a cap only or something more, with photos you can see for yourself.
- 3
Written, flat-price estimate. We give you the price in writing before any work starts, so there are no surprises. If the inspection shows the crown can wait a season, we’ll tell you that plainly instead of upselling work you don’t need yet.
- 4
The repair or installation. We set the new cap, repair or coat the crown, or fit a custom or multi-flue unit, using the materials matched to your chimney. Everything is secured and sealed at the crown so wind and water stay out.
- 5
Final check and photo report. We confirm the cap is seated and the crown is shedding properly, then leave you with a photo report of what we found and what we did. You keep the record for your own files or for a future sale.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Frankford?
A typical chimney cap installation in Frankford runs $150 – $400 depending on flue size, material, and whether it’s a standard or custom unit. Cap replacement usually lands in the same range. Crown repair typically runs $300 – $700 depending on how much of the crown has failed, while a crown coating is generally the lower end of that, around $200 – $450. A multi-flue or custom cap sits at the higher end because it’s fabricated to your chimney’s measurements.

What moves the price: the number of flues, the condition of the masonry around the crown, whether the crown needs a spot repair or a partial rebuild, and whether the job needs a custom-fabricated cap. The best way to avoid overpaying is to get a written, flat-price estimate before anyone starts, and to ask whether the crown work can safely wait a season if the damage is minor. That’s a fair question, and we’ll answer it honestly.
Every free estimate includes the full inspection, the camera check, and a written price with photos. You’ll know exactly what’s wrong and what it costs before you decide. Call (833) 962-9222 for an exact quote; estimates are free.
Chimney Cap & Crown Near Frankford – Our Service Area
We handle chimney cap & crown work across Frankford and the surrounding neighborhoods, including Oxford Circle, Olney, Tacony, Kensington, and Port Richmond, plus West Philadelphia and Overbrook to the west. If you’re just outside those areas, call and we’ll confirm coverage. Fast dispatch from 7am to 7pm, Sunday through Friday, and we answer the phone 24/7.
Serving Frankford, PA – Our Local Coverage Area
We serve Frankford and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Frankford
A chimney cap is the cover over the flue opening that keeps water and animals out while letting smoke escape. The crown is the concrete or mortar slab at the top of the chimney that sheds water away from the brick below it. They protect different parts of the same system, which is why we inspect both together. If one has failed, the other is usually worth checking at the same time.
Most cap installations and replacements are done in a single visit, often the same day you call if the schedule allows. Crown repairs take longer because the mortar has to be shaped and set properly. A crown coating is a shorter job than a full repair or rebuild. We’ll give you a realistic time frame in your written estimate.
Cap installation or replacement typically runs $150 – $400, crown repair $300 – $700, and crown coating around $200 – $450, depending on the flue count and the condition of the masonry. The written estimate sets the final price, and the estimate itself is free. Call (833) 962-9222 for an exact quote.
Yes. We fit and service Gelco and Olympia Chimney caps and know where they tend to wear out. We also work with Famco components and HeatShield when a crown or liner repair is needed alongside the cap. Whatever make is on your chimney, we can inspect it and tell you whether it needs replacement.
We do same-day work when the schedule allows, and we’ll tell you honestly whether your job can be handled that day. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday.
We stand behind our installation and repair work, and we’ll explain what’s covered in writing when we give you the estimate. The materials we use are professional-grade, chosen for durability in this climate. Ask about coverage at the estimate and we’ll spell it out.
Clear access to the fireplace and the chimney exterior so our technicians can inspect and work safely. If you have a wood-burning stove or insert, make sure it’s off and cool before we arrive. Have any past inspection reports or photos ready if you have them, since they help us track changes. Beyond that, there’s nothing special to do.
Schedule Your Chimney Cap & Crown Service in Frankford Today
A failing cap or crown is a small repair that gets expensive when water and weather get in. We inspect the whole system, give you a written flat-price estimate, and show you what we found with photos you can check yourself. Call (833) 962-9222 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. From annual sweep to full liner rebuild – one specialist, start to finish.
Written by the team at Chimney Sweep Frankford.