Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Frankford?
Fireplace services in Frankford typically run from about $150 to $350 for a standard sweep and inspection, $400 to $900 for common fireplace repairs, and $2,000 to $4,500 for a full liner rebuild. The exact figure depends on what’s wrong with the system, not just what you can see from the hearth. A written estimate after an inspection is the only way to know your real number.
We offer free estimates across Frankford and the surrounding neighborhoods. Call (833) 962-9222. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Services Cost Breakdown (2026)
Every job gets priced line by line. Here’s what the main services typically cost in the Frankford market this year.
| Service | Typical Range | What’s Included |
|---|---|---|
| Annual chimney sweep + basic inspection | $150 – $350 | Creosote removal, soot clearing, visual check of flue, firebox and damper |
| Camera inspection (video scan) | $200 – $500 | Interior flue imaging to find cracks, gaps, offsets and hidden blockages |
| Chimney cap installation | $200 – $550 | Stainless or copper cap sized to the flue, with spark arrestor and animal guard |
| Crown repair or rebuild | $400 – $1,500 | Patching hairline cracks or recasting the crown to shed water properly |
| Firebox / damper repair | $300 – $900 | Refractory brick replacement, damper hinge or plate repair, mortar repointing |
| Fireplace glass, gasket or door repair | $200 – $600 | Gas fireplace door seals, glass panels, pilot and burner adjustments |
| HeatShield ceramic liner repair | $1,400 – $4,000 | Restorative resurfacing of a damaged flue, an alternative to full relining |
| Full stainless liner installation | $2,000 – $4,500 | New flexible or rigid liner, insulation, top plate, connection |
| Masonry rebuild (upper chimney section) | $2,500 – $8,000+ | Tear-out and rebuild of damaged brickwork, flashing, crown and cap integration |
What pushes the number up: a chimney with offset flues, a liner that’s failed along its full length rather than in one spot, or masonry damage that runs below the roofline. What brings it down: catching a problem early at the sweep stage, before a small damper fix turns into a firebox rebuild. From annual sweep to full liner rebuild, one specialist handles it start to finish, so you’re not paying a second contractor to re-diagnose what’s already been found.
We work with the brands chimney pros rely on: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Those are professional-tier lines, not parts pulled off a big-box shelf, and they hold up better against the freeze-thaw swings this part of Pennsylvania throws at a chimney.
What Affects Fireplace Services Pricing in Frankford
Frankford’s housing stock matters here. A lot of the row homes and twins in this part of Northeast Philadelphia were built in the first half of the last century, and many still have their original masonry fireplaces and clay-tile liners. Those systems were never designed for modern stove inserts or the way people run a fire today. That mismatch is one of the biggest cost drivers we see.
- Age of the liner. An unlined or clay-tile flue that’s cracked costs far more to bring up to safe condition than one with a sound existing liner. Liner condition, not chimney height, is usually the single largest line on the bill.
- Type of fireplace. A wood-burning masonry fireplace, a gas insert and a factory-built unit each take different parts and different labor. Gas work adds diagnostic time and often a part order.
- Level of creosote buildup. Normal soot sweeps clean. Glazed, tar-like creosote in a chimney that hasn’t been cleaned in years takes longer and drops money straight into the sweep line.
- Roof access and pitch. A steep roof, a tight rowhouse setback, or a chimney crowded by a neighboring wall changes how much time and safety gear a job takes. Frankford’s dense row-home blocks routinely present this.
- Freeze-thaw damage to masonry and crown. Our winters swing above and below freezing repeatedly, and water that soaks into brick, mortar and the crown opens cracks over time. Missing caps and cracked crowns speed that up, which is why a $200 cap today can save a masonry repair later.
- Whether repair or full replacement makes sense. Spot relining or HeatShield restoration can cost less than a full liner install when the damage is contained; when the whole flue is shot, a full liner is the honest call.
One more local note: older Frankford homes sometimes have fireplaces that were sealed off or converted decades ago, and a buyer walking into that situation during a home inspection often needs a full assessment before the first fire. That’s a different-cost job than a routine sweep, and it’s worth knowing which one you’re booking.
How to Save on Fireplace Services
The single biggest lever is timing. A yearly sweep at the lower end of the range is what keeps a $150 job from turning into a $2,500 liner rebuild. Creosote and moisture damage both compound quietly, and neither one announces itself until something fails.
- Book the sweep before the heating season. Getting an annual cleaning on the calendar in the warmer months means you’re not paying rush-adjacent pricing and you’re not scrambling after the first cold snap.
- Get a camera inspection when a problem is suspected. A $200 to $500 flue scan often rules out a much larger repair, or catches a crack before it spreads. It’s the cheapest diagnostic in the lineup.
- Cap the chimney. A modest cap install keeps out rain, animals and debris, which is what cracks crowns and rots mortar in the first place.
- Fix small cracks in the crown early. Patching a hairline crack is cheap. Recasting a crown that’s been taking on water for years is not.
- Ask for HeatShield where it applies. When a liner has failed in spots but the overall structure is sound, HeatShield ceramic restoration can bring it back to service for less than a full reline. Many sweep-only companies can’t offer it, so ask specifically.
- Bundle the inspection with the sweep. Having the same specialist clean, inspect and quote repairs in one visit cuts repeat labor. Our estimates are free, so it costs nothing to get the numbers in writing.
None of this replaces a real inspection. Chimney work touches fire and combustion gas, and guessing at a flue’s condition from the fireplace floor is how people get hurt. If anything about your fireplace feels off, get it looked at by a trained technician. Call (833) 962-9222 to book a free estimate.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Frankford?
A standard chimney sweep in Frankford typically runs $150 to $350, and that usually includes a basic visual inspection. Prices land at the higher end when there’s heavy creosote buildup or awkward roof access. Call (833) 962-9222 for an exact quote; estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair is cheaper when the damage is contained: HeatShield restoration typically runs $1,400 to $4,000 versus $2,000 to $4,500 for a full stainless liner. When the liner has failed along its full length or the flue is unlined, replacement is the right call at any price. A camera inspection tells you which situation you’re in. Call (833) 962-9222 to get it scoped.
How much does fireplace repair cost in Frankford?
Most fireplace repairs in Frankford fall between $300 and $900, covering dampers, firebox brick, refractory mortar and fireplace doors. Gas fireplace glass, gasket or pilot work lands in a similar range. The written estimate sets the final price, and estimates are free. Call (833) 962-9222 to book one.
Can you come today?
Yes, same-day service is often available in Frankford. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (833) 962-9222 and we’ll get you scheduled.
Do I need a chimney inspection before using my fireplace for the first time?
Yes, especially in an older Frankford home you’ve just bought. An inspection typically costs $150 to $500 and catches cracked liners, blockages and sealed-off flues before the first fire. It’s the cheapest insurance against a far bigger repair. Call (833) 962-9222 for a free estimate.
A Specialist Who Handles the Whole System
A sweep-only outfit cleans and leaves. When the flue, crown or firebox needs real work, you want a team that can diagnose the system, not just the symptom. Chimney work is all we do, which means we see problems generalists miss, and single-source accountability means inspection, cleaning, repair and rebuild all sit with the same specialist. Explore fireplace services or start with Chimney Sweep Frankford to see the full range. Whether it’s a cracked crown or a deteriorating liner, we diagnose the system. Call (833) 962-9222 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Frankford.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Jodi Parker"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Paige Thompson"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Heather Anderson