Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Frankford?
Most chimney repairs in Frankford run between $185 and $3,200, and the wide spread reflects how many different things can go wrong inside one chimney system. A crown patch or a new cap sits at the low end. Relining a flue or rebuilding masonry above the roofline climbs toward the top. We give a written estimate before any work starts, so the number you agree to is the number you pay.
Chimney work is the only thing we do, which matters when you’re trying to figure out what a fair price looks like. A generalist contractor bidding a chimney job is often guessing at the anatomy. We diagnose the whole system: flue, liner, crown, cap, flashing, and firebox together. Call (833) 962-9222 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical chimney repair in Frankford ranges from about $185 for a minor cap or crown fix to $3,200 or more for a full reline or masonry rebuild.
- Liner repair with a HeatShield ceramic application usually lands well below the price of a full stainless reline.
- Crown and cap work is often the cheapest problem to fix and the most expensive one to ignore.
- Older Frankford rowhouses and twins hide chimney problems that only show up on a proper inspection.
- Our technicians have up to 15 years of experience, and every estimate is free.
Chimney Repair Cost Breakdown (2026)
Here’s roughly what each type of chimney repair runs in the Frankford market this year. These are typical ranges for a single-flue residential chimney. Larger chimneys, multiple flues, and heavy masonry damage push the numbers up.
| Repair | Typical Cost Range | What It Covers |
|---|---|---|
| Chimney cap replacement | $185 – $525 | Removing a rusted or missing cap and fitting a new one sized to the flue |
| Crown repair or rebuild | $325 – $950 | Patching hairline cracks or recasting the concrete crown at the top of the stack |
| Crown rebuild with masonry | $700 – $1,400 | Rebuilding the top course of brick under a new crown when the mortar is failing |
| Flashing repair or replacement | $275 – $750 | Resealing or replacing the metal where the chimney meets the roof |
| Firebox and damper repair | $450 – $1,600 | Rebuilding firebox brick, replacing a rusted damper, resurfacing firebox panels |
| HeatShield liner repair | $1,100 – $2,200 | Ceramic resurfacing of a cracked or spalling clay liner, where the liner is still structurally sound |
| Full stainless liner installation | $1,500 – $3,200 | New stainless liner, insulation, and top plate for a failed flue |
| Tuckpointing and masonry repair | $550 – $2,400 | Repointing joints, replacing spalled brick, repairing the stack above the roofline |
| Partial chimney rebuild | $1,800 – $3,200 | Rebuilding the section above the roofline when the top of the stack is compromised |
What moves a chimney repair up or down that range usually comes back to three things: how far the damage has spread, what’s hidden behind the surface, and whether the flue needs restoration or full replacement. A crown that looks like one cracked line from the ground is often a crown that’s separated from the flue tile once we’re up top. The reverse happens too. A chimney that looks badly damaged from the street sometimes just needs repointing and a new cap.
Material choice matters as well. A stainless liner from a professional line like DuraFlex or Olympia Chimney costs more up front than a bare-bones option, but it’s the material that actually holds up against flue gases and heat cycling. We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield because those are the products credentialed chimney technicians install, not the discount versions pulled off a big-box shelf.
What Affects Chimney Repair Pricing in Frankford
Frankford’s housing stock shapes what we find. This is an older neighborhood of rowhouses and twins, many built with masonry chimneys that have been through more freeze-thaw cycles than any single repair could address at once. Those cycles matter here. Water gets into a mortar joint, freezes overnight, expands, and pushes the joint a little further apart. Repeat that across a few winters and a chimney that only needed repointing becomes one that needs a partial rebuild. That’s the single biggest cost variable in this part of Philadelphia.
- Roof access and chimney height. A chimney that’s twenty feet above the roofline takes more scaffolding and more time than one at eight feet. Height adds labor on almost every repair.
- Age and condition of the masonry. Older Frankford chimneys often have multiple small failures at once. Fixing one without addressing the rest means paying twice, so we price the whole system honestly.
- Liner condition. A clay liner with hairline cracks may be a HeatShield candidate. A liner that’s spalled, separated, or missing tiles calls for a full stainless reline, which is the pricier path but the only safe one.
- Flue configuration. Single-flue chimneys are straightforward. Chimneys serving two or three appliances take more diagnostic time and more product.
- Water damage already underway. Rusted dampers, saturated crowns, and stained ceiling plaster all point to water that’s been getting in for a while. That changes how much of the system needs attention.
- What’s found at inspection. Sometimes the repair you called about reveals a second, bigger issue. We don’t quote a crown fix and then surprise you with a reline.
One local factor worth flagging: older masonry chimneys on this kind of housing stock often have no liner at all, or a liner installed decades ago for a different appliance. If you’ve just bought an older Frankford property and haven’t had a full assessment, that first inspection is where a lot of the cost picture comes into focus. Expect an inspection to look at the flue from both ends, not just a sweep of the accessible portion.
How to Save on Chimney Repair
The cheapest chimney repair is always the one you do before the problem spreads. Small, inexpensive fixes today are the ones that keep a chimney out of the partial-rebuild column five years from now.
- Fix the crown and cap early. A cracked crown lets water in at the exact point where the flue is most vulnerable. Patching a $325 problem early beats rebuilding a $1,400 one later.
- Keep up with the annual sweep. A yearly cleaning is how small problems get caught before they become structural ones. It also protects the liner from creosote damage.
- Let a specialist diagnose the whole system. A generalist might patch a crack without noticing the liner behind it is failing. Chimney work is all we do, which means we see problems generalists miss.
- Ask about HeatShield before you commit to a reline. When the liner is cracked but still sound, HeatShield ceramic repair restores it at a fraction of the cost of full replacement. Many sweep-only companies don’t offer it because it’s a specialist process.
- Get the estimate in writing before anything starts. A written estimate sets the final price. Anything else is a guess.
We offer free estimates on every repair, from a single cap to a full rebuild. There’s no fee to have us look, and no pressure to book the work the same visit. Call (833) 962-9222 and we’ll schedule a time that works for you.
Common Chimney Repairs We Price in Frankford
Every repair we quote falls inside our full-system scope. That means the same specialist team that inspects your chimney handles the sweep, the cap and crown, the liner, the masonry rebuild, and the fireplace repair. You don’t get handed off to a second contractor halfway through.
Crown and cap repairs
The crown is the concrete slab at the top of the chimney that sheds water away from the flue. When it cracks or separates, water finds its way down the flue tile and into the chimney structure. Cap replacement runs roughly $185 to $525 in Frankford; crown repair or recasting runs $325 to $950. These are the two most common repairs we price, and the two most worth doing promptly.
Liner repair and relining
The liner is what keeps combustion gases moving up and out instead of leaking into your home. A cracked clay liner is a carbon-monoxide concern, not just a performance one. When the liner is still structurally sound, HeatShield ceramic repair resurfaces it from the inside, running $1,100 to $2,200. When the liner is failed, spalled, or gone, a full stainless reline runs $1,500 to $3,200. We install DuraFlex and Olympia Chimney liners because those brands hold up against flue gas and heat cycling over the long term.
Masonry repair and rebuilds
Tuckpointing, repointing, spalled brick replacement, and partial rebuilds above the roofline make up a large share of the work on Frankford’s older chimneys. Tuckpointing and masonry repair runs $550 to $2,400; a partial rebuild above the roofline runs $1,800 to $3,200. We inspect the whole stack, not just the visible face, because the failure inside a masonry chimney often starts where no one’s looking.
Firebox and damper repair
The firebox takes the most direct heat of any part of the system. Rebuilding firebox brick, resurfacing firebox panels, and replacing rusted dampers run $450 to $1,600. A rusted damper is usually a sign water has been getting into the flue; we track down the source rather than just swapping the part.
Chimney Repair Costs in Nearby Communities
Pricing across the Frankford area stays broadly similar because the housing stock and labor market are shared, but a few local differences show up. Neighboring parts of Northeast Philadelphia have comparable masonry repair and relining costs. Homes toward the river with more exposure to wind-driven rain tend to see more crown and flashing repair. Older rowhouses with shared party walls need careful flashing work where the chimney meets two roofs at once, which adds a bit of labor.
If you’re comparing estimates across the area, ask each contractor what their scope covers. A number that looks lower often leaves out insulation, a top plate, or the crown work. For a deeper look at our approach to repairs, see chimney repair.
Why Chimney Repair Prices Vary So Much
Chimney repair isn’t a product with a sticker price. It’s a set of diagnoses that depend on what’s actually wrong. Two chimneys with the same visible crack can need completely different repairs because one has a sound liner and the other doesn’t. The only way to know which column you’re in is a proper inspection. Anyone who quotes a chimney repair over the phone without looking is guessing.
That’s why we don’t publish fixed prices. We give ranges like the ones on this page so you can plan, but the written estimate after inspection sets the final number. Prices in this guide reflect estimated ranges for the Frankford market as of 2026 and can shift with material costs and the specifics of your chimney.
One other thing worth understanding: prevention is almost always cheaper than repair. A swept and inspected chimney costs less than a rebuild, every time. Keeping a cap on the flue and a sound crown on top of it keeps water out, and water is the single most common cause of the expensive repairs we quote. If you’re not sure about the state of your chimney, Chimney Sweep Frankford covers the inspection that answers it.
Safety and Chimney Repair
Chimney repairs involve heights, masonry, and combustion systems, and some of the work behind these prices is genuinely dangerous to attempt yourself. Relining a flue, rebuilding masonry above the roofline, and diagnosing a cracked liner all call for a trained professional. A cracked or missing liner lets carbon monoxide into the home, and that’s a risk no homeowner should try to solve from a ladder with caulk and hope. If you suspect your liner or firebox is compromised, stop using the fireplace until it’s inspected.
Our technicians have up to 15 years of experience with chimney systems, and the work they do is confined to chimneys and fireplaces. That focus is why we can tell the difference between a liner that needs a HeatShield application and one that needs full replacement, and why we don’t recommend the pricier path when the cheaper one is safe.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Frankford?
Most chimney repairs in Frankford cost between $185 and $3,200, with the typical single repair landing around $600 to $1,200. Cap and crown fixes sit at the low end; relining and masonry rebuilds sit at the top. Call (833) 962-9222 for an exact quote based on your chimney. Estimates are free.
Is it cheaper to repair a chimney or rebuild it?
Repair is almost always cheaper than a rebuild when the damage is contained. A crown patch or a HeatShield liner repair typically costs a fraction of a full reline or partial rebuild. The deciding factor is whether the structure is still sound. An inspection tells you which column you’re in, and that’s what we’ll price. Call (833) 962-9222 to schedule it.
How much does a chimney liner cost in Frankford?
A full stainless liner installation in Frankford typically costs $1,500 to $3,200. HeatShield ceramic liner repair, when the liner is still structurally sound, usually runs $1,100 to $2,200. Which one is right depends on the condition of the existing liner. Call (833) 962-9222 and we’ll inspect before recommending anything.
Can you come today?
Same-day service is often possible, so it’s worth calling to check. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Reach us at (833) 962-9222 for a free estimate.
Why does my chimney repair estimate vary so much between contractors?
Estimates vary because scope varies. One quote may cover a crown repair only; another may include the liner, flashing, and cap. Always compare what’s included, not just the bottom line. A specialist who diagnoses the whole system will tell you what needs fixing and what can wait. Call (833) 962-9222 for a written estimate that spells out the scope.
Get a Free Chimney Repair Estimate in Frankford
Whether it’s a cracked crown, a rusted damper, or a liner that’s past saving, the first step is the same: an inspection that tells you what you’re actually dealing with. From annual sweep to full liner rebuild, one specialist handles it start to finish. Our technicians have up to 15 years of experience, and we work with the brands chimney pros rely on: DuraFlex, HeatShield, Copperfield, and more. Call (833) 962-9222 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Frankford market as of 2026. Chimney Sweep Frankford offers free estimates – call (833) 962-9222.
Written by the team at Chimney Sweep Frankford.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Jodi Parker"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Paige Thompson"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Heather Anderson