Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Frankford?
Chimney liner and rebuild work in Frankford typically runs from about $450 for a HeatShield ceramic liner repair up to $9,000 or more for a full masonry rebuild with a new liner. A standard stainless liner install usually lands between $1,800 and $4,200, while a partial rebuild of a cracked crown or damaged flue section is commonly $1,200 to $3,500. Your written estimate sets the final price, and it’s free to get one. Call (833) 962-9222 to schedule an assessment.
Frankford’s rowhouses and older detached homes were built for coal, and many still carry the original clay tile liners that have spent decades absorbing heat, moisture and the freeze-thaw swings of a Philadelphia winter. When that liner fails, you don’t just lose draft. Combustion gases can move into the living space, which is a carbon monoxide concern, not a performance nuisance. That’s why we diagnose the whole system rather than the visible symptom. From annual sweep to full liner rebuild, one specialist handles it start to finish.
Key Takeaways
- Stainless chimney liner installation in Frankford runs about $1,800 to $4,200 typical, depending on height, flue size and appliance type.
- HeatShield ceramic liner repair starts around $450 and can restore a deteriorated flue without a full reline in the right conditions.
- Partial crown, cap and flue repairs fall between $300 and $1,800; a full masonry rebuild starts near $5,000.
- Your written estimate is the final price. Estimates are free.
- We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the line items break out for Frankford homes in 2026. Ranges are typical for the market, not a quote. We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield because those are the brands chimney pros rely on, and material choice moves the number more than most homeowners expect.
| Line Item | Typical Range (Frankford, 2026) |
|---|---|
| Full chimney inspection (Level 1-2) | $150 – $450 |
| Standard stainless liner install (DuraFlex or Olympia) | $1,800 – $4,200 |
| Insulated flex liner upgrade | $300 – $800 added |
| HeatShield ceramic liner repair | $450 – $1,600 |
| Chimney cap installation (Famco, Copperfield) | $200 – $650 |
| Crown repair or rebuild | $400 – $1,200 |
| Partial flue or masonry rebuild | $1,200 – $3,500 |
| Full masonry chimney rebuild with new liner | $5,000 – $9,000+ |
| Fireplace repair or firebox relining | $500 – $2,500 |
What pushes a Frankford liner job toward the top of the range? Tall chimneys cost more because the liner is priced per foot and the access is harder. A gas appliance needs a different liner spec than a wood-burning insert, and the materials aren’t interchangeable. If the existing flue is out of round, offset, or has crumbling sections, we may need to remove and re-seat masonry before a liner can go in at all. HeatShield is often what saves the job from becoming a full rebuild, since it can smooth and restore a compromised flue interior when the structure underneath is still sound.
Rebuilds sit at the other end. A rebuild means tearing back to solid masonry, re-laying flue tile or setting a new liner, and rebuilding the crown so water sheds away from the structure. The crown is the single biggest cause of premature chimney failure in Frankford because a cracked crown lets water in at the top and it freezes and expands through the winter. Fixing the crown early is dramatically cheaper than the rebuild it prevents.
What Affects Chimney Liner & Rebuild Pricing in Frankford
- Chimney height and roofline access. Liner is priced per vertical foot, and a tall chimney on a steep Frankford roofline takes more time to reach safely. Both add to labor.
- Appliance type. A wood-burning fireplace, a gas insert, and an oil furnace each call for a different liner spec and venting setup. Getting the spec wrong is a real hazard, so a properly matched liner is part of the price, not an add-on.
- Condition of the existing flue. A straight, clean clay flue takes a liner easily. An offset, out-of-round, or crumbling flue may need masonry repair before anything goes in. HeatShield can bridge some of that gap; a failed structural flue cannot.
- Masonry condition above the roofline. Spalling brick, a cracked crown and failing mortar joints are typical on older Frankford rowhouses. The more masonry that needs reset, the closer you move toward the rebuild range.
- Material and brand selection. DuraFlex and Olympia liners are the professional-tier choices we install. A big-box liner may look cheaper on the shelf but doesn’t carry the same wall thickness or warranty support, and re-doing a bad liner costs more than doing it right once.
- Freeze-thaw repair history. Philadelphia winters cycle above and below freezing repeatedly, which is hard on any masonry that’s already cracked. A chimney that’s been patched repeatedly will often need a fuller repair than one caught early.
- Whether restoration is possible at all. HeatShield ceramic repair is a restorative option some jobs qualify for and others don’t. A full reline is the answer when the original flue structure has failed.
Because chimney liner and rebuild work is all we do, we catch the conditions a generalist contractor might miss. When a homeowner hears “the chimney looks fine from the ground,” we’re the ones who get up top and check the crown, the flue interior and the liner spec together. That diagnostic accuracy is what keeps a job from being quoted too small or too large.
How to Save on Chimney Liner & Rebuild in Frankford
You can’t shave a chimney liner down to a bargain without trading away safety, but you can avoid the expensive surprises. A few things make a real difference.
- Get the inspection before the problem gets expensive. A crown repair at $400 to $1,200 now often prevents a rebuild in the $5,000-plus range later. Water is the enemy, and it works slowly until it doesn’t.
- Fix the crown and cap first. A Famco or Copperfield cap keeps rain and animals out, and a sound crown sheds water away from the flue. Both are inexpensive compared to masonry work and they protect the liner you may already have.
- Ask whether HeatShield applies to your flue. If the flue is deteriorated but structurally intact, ceramic restoration can cost a fraction of a full reline. Not every job qualifies, but it’s worth asking before you commit to a rebuild.
- Bundle the work into one visit. If the cap, crown and liner all need attention, doing them together is cheaper than three separate appointments, and it’s the same specialist team start to finish. That single-source accountability matters when one contractor installs a liner and another later blames it for a crown failure.
- Get the free estimate in writing. A written estimate locks in the scope and price per job. Call (833) 962-9222, the estimate is free, and it’s the number your final price is based on.
We also install caps and crowns that work with the liner rather than against it, so the whole system vents and sheds water the way it’s supposed to. A clean chimney isn’t just about performance. It’s about keeping combustion gases where they belong, and a properly capped, lined system does both jobs at once.
FAQs – Chimney Liner & Rebuild Cost
What does a chimney liner cost in Frankford?
A standard stainless chimney liner install in Frankford typically costs $1,800 to $4,200, with insulated flex liners adding roughly $300 to $800. Height, flue size and appliance type move the number most. HeatShield ceramic repair, when the flue qualifies, starts around $450 and can avoid a full reline. Call (833) 962-9222 for a free exact quote.
How much does a chimney rebuild cost in Frankford?
A partial flue or masonry rebuild runs about $1,200 to $3,500, and a full masonry chimney rebuild with a new liner starts near $5,000 and can reach $9,000 or more. The spread depends on how much masonry has to come down and whether the crown needs full replacement. A free on-site estimate gives you the real number for your chimney.
Is HeatShield cheaper than a full reline?
Yes, in most cases. HeatShield ceramic liner repair typically costs $450 to $1,600, while a full stainless reline is $1,800 to $4,200. It’s a restorative option for a deteriorated but structurally sound flue, so it doesn’t fit every chimney. We’ll tell you on site whether your flue is a candidate. Call (833) 962-9222.
Do I need a permit for a chimney rebuild in Frankford?
Most cities require a permit for structural masonry and venting changes, and that should be confirmed with the city’s building department before work starts. Permit requirements vary by scope, so we factor them into the estimate. We’ll walk you through what your job needs when we’re there.
Can you get my chimney relined today?
Same-day liner work is possible when the job is straightforward and the access is clear, though rebuilds and flues that need masonry repair usually take more than one visit. Call (833) 962-9222. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday, so we can often get an inspection on the calendar quickly.
Chimney liner and rebuild decisions come down to two questions: is the flue safe to use, and what’s the least you can spend to make it safe again. We answer both on site, with the brands chimney pros rely on and a written estimate you can act on. From a cracked crown to a failed liner, we diagnose the system, not just the symptom. Call (833) 962-9222 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Frankford market as of 2026. Chimney Sweep Frankford offers free estimates – call (833) 962-9222.
Written by the team at Chimney Sweep Frankford.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Jodi Parker"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Paige Thompson"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Heather Anderson