Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Frankford?
Chimney cleaning in Frankford typically costs $150 to $290, with most standard sweeps landing near the middle of that range. If the technician finds creosote buildup that has hardened into a glaze, or a blockage that needs clearing before the flue can be swept, you’ll land toward the upper end. A full inspection added to the clean runs more, and a fireplace that hasn’t been touched in several heating seasons usually takes longer to bring back to a clean, safe state.
We give free estimates and set the final price in writing before any work starts. If you want a real number for your chimney rather than a range, call (833) 962-9222. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cleaning Cost Breakdown (2026)
Below are the typical price ranges for the different stages of chimney work a Frankford homeowner is likely to need. Most jobs are a single line item. Some start as a sweep and turn into something larger once the technician sees the inside of the flue.
| Service | Typical Cost in Frankford | What It Covers |
|---|---|---|
| Standard chimney sweep | $150 – $290 | Removal of soot, ash, and creosote from the flue and firebox, plus a visual check |
| Level 2 inspection (camera) | $180 – $400 | Video scan of the interior liner, joints, and connections after a sweep |
| Sweep plus Level 2 inspection | $280 – $550 | Combined clean and full camera assessment in one visit |
| Creosote removal (glazed, Stage 3) | $400 – $900 | Rotary cleaning of hardened, tar-like creosote that a brush alone won’t move |
| Chimney cap installation | $200 – $550 | Stainless or copper cap to keep rain, animals, and debris out of the flue |
| Crown repair | $250 – $750 | Sealing or rebuilding the concrete crown that sheds water from the chimney top |
| Chimney liner installation | $1,800 – $4,500 | New stainless liner sized to the appliance, including insulation and fittings |
| Fireplace repair | $250 – $1,200 | Rebuilding damaged firebox brick, damper work, and mortar joint repair |
These ranges are estimates for the Frankford market as of 2026. The written estimate sets the final price, and it doesn’t change mid-job unless you approve a change first.
What Drives the Number Up or Down
A clean flue on a well-kept chimney is the low end. A flue loaded with glazed creosote, a firebox full of ash and former bird nests, or a liner that’s cracked in three places pushes toward the high end. A standard sweep is quick. Restorative work takes time, materials, and a second look at the whole system.
The type of liner matters too. Stainless liner installation runs higher than a sweep by an order of magnitude because it’s a rebuild of the flue’s protective layer, not a clean. When the technician tells you the liner is failing, that’s not the same conversation as the sweep. It’s a safety call about keeping combustion gases where they belong. From annual sweep to full liner rebuild, one specialist can handle it start to finish, so you’re not hunting down a second contractor for the next phase.
What Affects Chimney Cleaning Pricing in Frankford
Two chimneys of the same height can cost different amounts to clean. Here’s what actually moves the price:
- Level of creosote buildup. Light soot sweeps out easily. Stage 3 glazed creosote, a shiny, tar-like layer that forms when a wood fire burns cool and smolders, needs rotary equipment and more time. That’s the single biggest jump in cleaning cost.
- Flue type and size. A straight, round stainless liner is the easiest to sweep. Older masonry flues with offset tiles, odd shapes, or heavy mortar loss take longer and sometimes need a camera to see what’s happening.
- Access to the roof and damper. Grass, a low-pitch roof, or a damper that’s seized shut all add time. A chimney that hasn’t been opened in years can take as long to free up as it does to sweep.
- Blockages. Nests, leaves, and fallen brick need clearing before the sweep. Frankford’s tree canopy and older housing stock mean blockages are common on chimneys that sat unused for a season or two.
- Inspection level. A basic visual check is part of a sweep. A Level 2 camera inspection is a separate line item, and it’s the right call on a home you’ve just bought or a chimney with a known problem.
- Wood versus gas. A wood-burning appliance builds creosote and needs annual sweeping. A gas fireplace produces less solid debris, but its venting and connections still need checking. The cost structure differs.
The condition of the chimney and the fuel it burns tell us more about price than the square footage of the house. That’s why we look before we quote.
How to Save on Chimney Cleaning
The cheapest sweep is the one you don’t have to redo. A few habits keep the price at the low end and protect the flue between visits:
- Burn seasoned wood only. Dry, well-seasoned firewood burns hot and leaves less creosote than green or damp wood. Wet wood smolders and coats the flue.
- Don’t let a chimney sit idle for years. A flue that goes unused collects nests, debris, and moisture damage. A sweep on a maintained chimney is a small job. A neglected one rarely is.
- Get the cap installed early. A cap keeps rain, animals, and debris out of the flue. It’s one of the least expensive ways to prevent a flue from filling up in the first place.
- Book a sweep before the heating season. Scheduling a routine cleaning before the first cold snap means you’re not dealing with a problem in the middle of winter.
- Take the free estimate. We give free estimates, so there’s no cost to find out what your chimney actually needs. Call (833) 962-9222. We answer 24/7.
Skipping the sweep to save a couple hundred dollars tends to cost more later. Creosote that’s left to build up is the fuel a chimney fire needs, and a chimney fire is what turns a $200 sweep into a liner replacement.
Is It Cheaper to Repair or Replace a Chimney Liner?
When a liner is cracked or deteriorating, a HeatShield ceramic repair is often cheaper than full relining, and it’s a real alternative when the damage is localized. HeatShield is a specialist restorative process that rebuilds the liner’s interior surface rather than replacing the flue. A sweep-only company can’t offer it. A full stainless replacement runs $1,800 to $4,500 and is the right answer when the liner is failing along its length. We diagnose the system, not just the symptom, so you get the option that fits the damage. Call (833) 962-9222 for a free estimate before you decide.
Does Chimney Cleaning Cost More for a Gas Fireplace?
A gas fireplace sweep usually costs a bit less than a wood-burning sweep, often in the $120 to $220 range, because there’s less solid creosote to remove. But the connections, venting, and glass still need attention, and a gas appliance that hasn’t been serviced is worth a proper inspection. The price depends on the appliance and the venting, so the estimate is the place to start.
Why Chimney Cleaning Cost Varies by Home in Frankford
Frankford has a lot of older housing stock, and that shows up in the chimneys. Many homes have masonry chimneys with clay tile flues that have been through decades of freeze-thaw and have mortar joints that need attention. Others have been converted from coal or oil to wood or gas, and the flue may not be sized for the current appliance. A sweep on a chimney that was designed for one fuel and is now venting another takes more care, and sometimes reveals a liner that needs replacing before the next fire.
We work with the professional-grade brands chimney technicians rely on, including DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Those are the parts and materials that hold up in a working chimney, not big-box substitutes. We choose them because a flue is a long-term system, and the parts inside it should last longer than a single heating season. Our technicians have up to 15 years of experience, and every job is a chimney or fireplace job, so the diagnostic eye stays sharp.
If you’d like to see the full range of what we handle, start with chimney sweep Frankford and work from there. Sweep, cap and crown, liner, rebuild, and fireplace repair are all one trade for us.
Why Full-System Coverage Keeps the Cost Honest
A chimney is a system: firebox, damper, flue, liner, crown, and cap. When one part fails, the others feel it. That’s why we look at the whole chimney rather than just sweeping the flue and leaving. A cracked crown lets water in, water damages the liner, and a damaged liner is a venting problem you can’t see from the living room. Catching it during a routine sweep is cheap. Catching it after a chimney fire is not.
We can handle every phase of that work, so you’re not handed off between a sweep company and a mason and a liner installer. When we find a problem during a cleaning, the same specialist team can quote and complete the repair. Chimney work is all we do, which means we see problems generalists miss. Whether it’s a cracked crown or a deteriorating liner, we diagnose the system, not just the symptom.
A Word on Safety
Chimney work involves heights, and some of it involves opening up a firebox or working around a flue that has carried hot gases for years. We don’t recommend homeowners climb the roof or open a flue line themselves. Creosote is flammable, and a blocked or damaged flue is a carbon monoxide risk. A trained technician with the right equipment and a clear view of the system is the safer path, and it’s what the price of a sweep actually pays for.
FAQs – Chimney Cleaning Cost
How much does chimney cleaning cost in Frankford?
A standard chimney cleaning in Frankford typically costs $150 to $290. That range covers soot and creosote removal from the flue and firebox plus a visual check. Heavy glazed creosote, blockages, or a required camera inspection can push the total higher. Call (833) 962-9222 for a free estimate.
Does chimney cleaning cost more if the chimney hasn’t been cleaned in years?
Yes, often $400 to $900, because a long-neglected flue tends to have Stage 3 glazed creosote that needs rotary cleaning rather than a standard brush. Nests, debris, and seized dampers also add time. The estimate tells you where your chimney falls on that scale.
Can you clean my chimney the same day?
Same-day service is often possible. Call (833) 962-9222 and we’ll book you in. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside those dispatch hours is booked into the next opening.
How much does chimney liner replacement cost in Frankford?
Chimney liner replacement typically runs $1,800 to $4,500, depending on the flue height, the liner material, and whether insulation and fittings are needed. A HeatShield ceramic repair can cost less when the damage is localized. Call (833) 962-9222 to find out which option fits your flue.
Is it cheaper to repair or replace a chimney?
Repair is almost always cheaper than replacement. Crown repair runs $250 to $750, and a localized liner repair costs less than a full reline. Full replacement only becomes the answer when structural damage is extensive. We diagnose the chimney before recommending either, so you’re not paying for more than the problem calls for. Call (833) 962-9222 for a free estimate.
How often should a chimney be cleaned?
Once a year for a wood-burning fireplace is the standard. If you burn often, or burn wood that isn’t fully seasoned, it may need a second sweep in a season. A gas fireplace needs annual checking too, even though it produces less creosote. Routine cleaning is far cheaper than the repair that follows a skipped season.
Ready for a Real Number?
Ranges are useful for planning, but your chimney has its own story. The fastest way to know what yours needs is a free estimate from a team that works on nothing but chimneys and fireplaces. We install and work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, and we handle everything from a routine sweep to a full rebuild under one roof.
Call (833) 962-9222 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Frankford market as of 2026. Chimney Sweep Frankford offers free estimates – call (833) 962-9222.
Written by the team at Chimney Sweep Frankford.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Jodi Parker"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Paige Thompson"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Heather Anderson