Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Frankford Homeowners Choose Gelco Chimney Cleaning
We provide independent Gelco chimney cleaning, repair, and installation service in Frankford, PA. What sets our Gelco work apart is that we evaluate the parts actually installed in your chimney, run a camera through them, and tell you plainly whether the Gelco liner, cap, or damper needs cleaning, repair, or replacement. As an independent service provider, we are not affiliated with, authorized by, or endorsed by Gelco, so our assessment carries no incentive to sell you a product. Our technicians have up to 15 years of experience. Call (833) 962-9222. We answer 24/7.
Why Trust Chimney Sweep Frankford for Your Gelco Chimney Cleaning?
Gelco stainless liners and caps are among the most commonly specified aftermarket chimney products in older northeastern rowhouse stock, so independent sweeps here handle them constantly and know their quirks. Frankford’s density of century-old shared-party-wall chimneys means we see the brand often enough to recognize the particular sound of a loose flexible liner when a brush hits it, and the particular stain pattern of a corroded mounting leg on a Gelco cap.
That familiarity matters during service. We use quality parts that fit Gelco equipment, so a cap replacement or a damper gasket swap seats correctly and doesn’t fight the existing mount. We work warranty-safe, which means we document what we find on camera before we touch anything, and we leave existing connections intact wherever the product still has service life in it. Gelco liners and caps are the kind of equipment that rewards careful handling; a careless sweep can turn a working joint into a shifted one. Because chimney work is all we do, we diagnose the system and not just the symptom. Whether it’s a cracked cap leg or a flexible liner that has offset slightly at a joint after years of heat cycling, we see problems generalists miss.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Fix in Frankford
Gelco equipment fails in predictable ways. These are the five patterns we run into most in Frankford’s rowhouse stock, listed with what causes each one.
- Flexible liner seams and joints loosening or offsetting. Years of heat cycling work the seams in a single-wall or insulated Gelco liner loose. When a joint shifts, it creates a ledge inside the flue, and creosote collects at that point. That’s the choke point that stops a brush from reaching the bottom of the flue, and it’s the most common reason a Frankford sweep can’t clear a chimney the normal way.
- Stainless caps corroding or loosening at the mounting legs. A Gelco chimney cap on a short exterior stack in Frankford takes the full force of humid summers and freeze-thaw winters. The mounting legs can loosen over time, opening gaps that let rain and debris into the flue. Rust streaks running down the crown are the usual visual sign.
- Top-sealing damper gaskets hardening. The gasket in a Gelco top-sealing damper assembly is what makes the seal work. After several heating seasons it stiffens and stops sitting flush, which shows up as cold air and downdraft coming down the chimney even when the damper is closed. Homeowners often mistake this for a draft problem higher up the flue.
- Liner-to-appliance connector gaps. At the insert or firebox, the connection between a Gelco liner and the appliance can develop gaps over time. Soot escapes behind the surround instead of going up the flue, which shows up as staining on the face of the fireplace and a smoke smell in the room. It’s a connection issue, not a sweeping issue, and it needs correcting before the next annual sweep does any good.
- Parging and clay-tile failure around the liner. Where a Gelco liner was installed inside an older flue without fully sealing the annular space, crumbling parging and degraded clay tile alongside it can shed debris onto the liner and block sweep access from the top. This is a Frankford-specific problem, since many of these original flues date to the 1880s-1920s mill-worker era and were built for coal, then retrofitted for oil, gas, and wood over a century.
Gelco Parts & Our Repair-vs-Replace Approach
Gelco-compatible components such as caps, damper gaskets, and liner sections are worth sourcing when the existing product is a current pattern. A cap that’s still available in the same mounting configuration can be replaced cleanly, and a damper gasket swap restores the seal without touching the liner. On older discontinued lines, a quality aftermarket equivalent that fits the same mount is the honest call, and we’ll say so rather than chase a part that no longer exists. We don’t claim to stock OEM or genuine Gelco parts; we source quality parts that fit your equipment, and we tell you what we’re using before we use it.
If the liner itself is compromised, or the appliance is being changed, replacing the whole assembly usually beats chasing individual parts. Patching a corroded liner that’s already failing at multiple joints just delays the same conversation a year down the road. We’ll walk you through the camera footage and let you decide. Call (833) 962-9222 for a free estimate, and we’ll give you a written price before any work begins.
Our Gelco Service Process – Step by Step
- 1
Diagnosis. We run a camera through the flue from the top down, checking the Gelco liner for shifted joints, the cap for mounting-leg corrosion and height, and the damper gasket if one is installed. You see the footage.
- 2
Repair or install. Depending on what the camera shows, we clear the flue, correct the cap height or replace the cap, swap a hardened damper gasket, or replace a damaged liner section. If the liner is past repair, we install a new one and discuss your options with DuraFlex or another professional-grade line.
- 3
Test. We check draft with the appliance running, confirm the damper seats fully, and verify no soot is escaping behind the surround. A photo report goes with the sweep.
- 4
Warranty-safe documentation. We record the condition of existing Gelco equipment before and after service, so there’s a written record of what we found and what we did. That record matters if a warranty question ever comes up.
See the difference
Before
After
Before
After
Before
AfterGelco Products We Service & Install in Frankford
We service and install the full range of Gelco stainless products found in Frankford chimneys. That includes single-wall and insulated flexible chimney liner kits, multi-flue and single-flue stainless chimney caps, top-sealing damper assemblies, and the crown and flashing accessory lines that finish the job at the top of the stack. On Frankford’s older rowhouse blocks, cap and crown work is often as important as the liner itself, since water intrusion at the top of a short exterior stack is what drives most of the deterioration between cleanings.
We Also Service These Brands
We’re a multi-brand chimney specialist, not a single-brand shop. Alongside Gelco, we work with DuraFlex liners and HeatShield ceramic liner repair, plus Olympia Chimney, Famco, and Copperfield products. That means when your chimney has been through a few retrofits and the installed equipment isn’t all one brand, we can still diagnose the whole system accurately. From annual sweep to full liner rebuild, one specialist, start to finish.
FAQs – Gelco Chimney Cleaning Service in Frankford
No. We are an independent service provider and are not affiliated with, authorized by, or endorsed by Gelco. That independence is deliberate: it means our recommendation is based on what’s actually installed in your chimney, not on a manufacturer relationship. Call (833) 962-9222 for a free estimate.
Yes. We source quality parts that fit Gelco equipment, including caps, damper gaskets, and liner sections, and we confirm fit before installation. We don’t claim to stock OEM or genuine Gelco parts, and we don’t describe ourselves as a Gelco dealer. We’ll tell you what part we’re using and why before we install it.
A standard Gelco sweep with camera inspection usually takes a couple of hours, while a liner replacement or cap and damper job runs longer. The written estimate sets the timeline for your specific chimney. Call (833) 962-9222 to book, and we’ll confirm what your job involves. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We cover Gelco flexible liner kits in single-wall and insulated versions, multi-flue and single-flue stainless caps, top-sealing damper assemblies, and crown and flashing accessory lines. If you’re unsure what’s on your chimney, a camera inspection will tell you.
No. A Gelco flexible liner needs a poly brush and gentler technique than a masonry flue, because a stiff brush can work the seams loose. That’s exactly why the joints matter: a loosened seam creates a creosote trap that a normal sweep can’t clear. Call (833) 962-9222 and we’ll inspect before we sweep.
The gasket has likely hardened and is no longer sitting flush against the damper plate. A gasket replacement usually restores the seal without replacing the whole assembly. Call (833) 962-9222 for an assessment.
Usually replace. Rust staining and a loose fit at the mounting legs means the cap is no longer keeping water out, and a loose cap is easier to replace than to re-seat reliably. We’ll confirm the flue dimension and mount before recommending a replacement.
Yes. A Level 2 inspection with camera footage shows the condition of the liner joints, the annular space around it, and the cap and damper, which is what you need to decide repair versus replacement. Call (833) 962-9222 to schedule one.
Gelco caps, liners, and dampers are found on gas as well as wood-burning chimneys, and they can be serviced. The failure patterns differ slightly on gas, so a camera inspection is the right starting point before we recommend anything.
Proper service shouldn’t void a warranty, and we document the condition of existing Gelco equipment before and after we work on it so there’s a written record. We’re independent and not warranty-connected to Gelco, so check your own warranty terms if a specific part is covered. Call (833) 962-9222 with questions.
Pricing is set per job by the written estimate after we’ve inspected the chimney, so we won’t quote a number before we’ve seen what’s installed. A routine sweep costs less than a liner section replacement, and the estimate is free. Call (833) 962-9222 for an exact quote, and we’ll walk you through what your chimney needs.
Book Your Gelco Service in Frankford, PA
If your Gelco liner, cap, or damper needs attention, or you’re due for an annual sweep, call (833) 962-9222. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written price sets the final cost.
Written by the team at Chimney Sweep Frankford.