Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Liner & Rebuild Across Hunting Park
If you live in Hunting Park, your chimney was probably built for coal. That single fact changes almost everything about a liner or rebuild job here. We’re Chimney Sweep Frankford, and we handle chimney liner & rebuild work throughout Hunting Park: diagnosing what a flue was originally designed to vent, whether it’s still safe for what it vents now, and whether your neighbors’ flues share the same stack. Our technicians have up to 15 years of experience, and we bring camera inspection, photo documentation, and a written estimate to every job. Call (833) 962-9222 and we’ll book a sweep or inspection. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Hunting Park Homeowners Call Chimney Sweep Frankford for Chimney Liner & Rebuild
Chimney work is all we do. Every job we take on in Hunting Park is a chimney or fireplace job, which means deeper diagnostic accuracy than a general home-services company splitting attention across trades. We work with professional-grade product lines including HeatShield, Gelco, Olympia Chimney, and Famco, chosen by certified chimney pros rather than sourced from a big-box shelf.
We know the difference between a detached suburban chimney and a Hunting Park rowhouse chimney, and we plan the job around that difference. From a single flue reline to a partial rebuild on a shared stack, one specialist team handles inspection, cleaning, repair, and rebuild. Single-source accountability keeps a complicated rowhouse job from turning into a relay between contractors. If you need a liner, a rebuild, or just to know whether your 1920s flue can take a modern appliance, we can go over exactly what a job like that looks like in your building.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Liner & Rebuild Services in Hunting Park
Stainless Steel Liner
In a Hunting Park rowhouse, a stainless liner is usually the fix when a coal-era brick flue can’t safely vent a modern gas furnace or a wood insert. The flue tiles come in undersized for the new fuel, so the appliance drafts poorly or spillage shows at the damper. We size and install the liner to match the appliance, then verify the flue path is isolated from any neighbor’s venting in a shared stack.
Flexible Liner
Flexible liners thread through the offsets and bends that old rowhouse chimneys were built with, so you don’t need to demolish anything to get a proper lining in. They’re a practical option for chimneys in the tightly packed blocks around Hunting Park where roof access is limited and the chase has to stay intact. A camera run before installation confirms the path is clear.
Liner Replacement
Aftermarket or parged-over liners from earlier conversions often fail at the joints, letting creosote or combustion gas escape into the masonry. When that happens, we pull the old liner and install a correctly sized replacement. Every replacement comes with a camera inspection and a photo report so you can see the condition of the flue before you commit to any work.
Partial Rebuild
Spalled brick and eroded mortar joints are the norm on Hunting Park chimneys after decades of freeze-thaw cycles, especially around the crown and at the roofline. A partial rebuild replaces the failed section above the roofline without disturbing the sound masonry below. We evaluate the whole system, not just the symptom, before recommending one.
Trusted Brands We Service in Hunting Park
We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, and Famco, along with Copperfield. HeatShield in particular is a ceramic liner repair process that lets us restore certain damaged flues without a full reline, a step many sweep-only companies can’t offer. These are the brands chimney pros rely on, and we select them based on the flue, the appliance, and the building. We don’t stock parts locally or keep a warehouse; instead we confirm material and lead time in your written estimate, so you know what’s going in your chimney before the work starts. Fast turnaround matters in a rowhouse where a blocked flue can affect a neighbor.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Liner & Rebuild Problems We See in Hunting Park Homes
- Cross-contamination in a shared stack. Many Hunting Park rowhouse chimneys share a single stack with neighbors, so a tech has to check whether one appliance’s venting is bleeding into another unit’s flue. A liner installed without verifying that isolation can leave both units drafting wrong.
- Failed aftermarket and parged liners. Earlier coal-to-gas or oil-to-gas conversions often left behind liners that fail at the joints, letting creosote or combustion gas escape into adjacent masonry. We camera-run the flue to find where it’s failing.
- Spalling brick and eroded mortar. Decades of freeze-thaw on exposed Hunting Park chimneys leave brick spalling and mortar joints crumbling, worst around the crown and flashing. That’s where storm water gets in, rusts the damper, and blocks the flue above an otherwise sound liner.
- Undersized flue tiles built for coal. The 1920s brick flues were sized for coal and later oil, and a modern gas appliance or wood insert often needs a correctly sized stainless liner to vent cleanly. Poor draft and spillage at the damper are the usual signs.
Pricing for Chimney Liner & Rebuild in Hunting Park, PA
A typical flexible stainless liner in Hunting Park runs $1,650 to $3,200, and a rigid or insulated stainless liner on a longer flue runs $2,800 to $4,500. Partial rebuilds on damaged Hunting Park crowns and top sections typically run $2,400 to $6,500, and liner replacement with a full camera inspection and photo report included lands in the $1,900 to $3,500 range. What moves the number is flue length, how many offsets the liner has to negotiate, whether the shared stack needs isolation work, and how much masonry above the roofline needs rebuilding. Every job starts with a flat-price sweep agreed before booking, and the written estimate sets the final price. Nothing gets recommended without camera evidence you can see for yourself.
We Also Serve Cities Near Hunting Park
We serve homeowners throughout Hunting Park and the surrounding neighborhoods, including Olney, Kensington, Port Richmond, and Frankford. If you’re just over the line in one of those areas, the same shared-stack and rowhouse concerns usually apply, and we can still diagnose the same problems. Call for a free estimate.
Serving Hunting Park, PA – Our Local Coverage Area
We serve Hunting Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Liner & Rebuild in Hunting Park
Yes. We can reline a single flue in a shared rowhouse stack, but we confirm first that your flue path is isolated from any neighboring venting. We run a Level 2 inspection with a camera to trace the flue and rule out cross-contamination before the liner goes in. Call (833) 962-9222 for an exact quote, estimates are free.
Often, yes. A coal-era flue is usually undersized and sometimes cracked or shared, and a modern gas appliance may not vent cleanly through it. The only way to know for sure is a camera inspection that shows whether the flue is sized right and whether the tiles are sound. If a liner is needed, we install a correctly sized stainless one. Call (833) 962-9222 to book an inspection.
Creosote is graded from light soot up through glazed, hardened buildup, and the higher grades are what call for extra attention before a liner can go in. Because so much of what we see in Hunting Park is from wood inserts and older appliances on flues never designed for them, we clean and camera-verify before recommending liner work. Call (833) 962-9222 to schedule a sweep and inspection.
Because a failing crown or flashing lets storm water into the masonry, rusts the damper, and blocks the flue above an otherwise sound liner. Philadelphia’s summers and freeze-thaw winters accelerate that damage on exposed Hunting Park chimneys, so we reseal the crown and flashing as part of liner work to protect the investment. Call (833) 962-9222 for a free estimate.
Once a year. A gas-heated Hunting Park rowhouse still vents combustion gases through a flue, and a blocked or cross-contaminated flue can be a carbon monoxide risk even with no wood fire. An annual inspection catches failing liners, rusted dampers, and water damage before they turn into a rebuild. Call (833) 962-9222. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Wherever you are on your block, from a tight inner rowhouse to the end of a shared stack, a liner or rebuild decision in Hunting Park comes down to what the camera shows. We can walk you through it and set a flat price before booking. If a repair can safely wait, we’ll tell you; if it can’t, we’ll show you why. Call (833) 962-9222 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Frankford.