Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Olney
If your Olney rowhouse has water staining the ceiling near the chimney or a crown that’s crumbling at the top, a cap and crown job is usually what stops it. We work on Olney’s brick rowhouse blocks and understand what makes a chimney here different from a suburban one. Most of these stacks are shared or set tight against the neighbor’s, so the fix has to account for more than one flue opening. Our technicians have up to 15 years of experience, and every job starts with a camera inspection and photos you can see for yourself. Call (833) 962-9222 to set up a free estimate.
Why Olney Homeowners Call Chimney Sweep Frankford for Chimney Cap & Crown
Chimney work is all we do. That focus matters on Olney’s rowhouse rows, where the problem usually isn’t just a loose cap sitting on top of a flue. It’s a shared masonry stack that’s been through decades of freeze-thaw winters, often with a coal-to-gas conversion in its past and a clay tile liner that’s already been relined once. We diagnose the whole system, both flue openings included, rather than replacing whatever looks worst.
Because we handle sweeping, liners, caps and crowns, masonry rebuilds, and fireplace repair under one roof, an Olney homeowner doesn’t need a second contractor when a crown job turns into flashing work or a liner question. That single-source accountability matters when the chimney is attached to a neighbor’s. We can offer HeatShield ceramic liner repair as a restorative option, which sweep-only companies can’t. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Olney
Every Olney chimney we look at gets the same treatment: we inspect first, photograph what we find, and write up the scope before any work is booked. Here’s what the cap and crown side of the work looks like on these blocks.
Cap Installation in Olney
A proper cap keeps rain, squirrels and birds out of the flue and sparks off the roof. On an Olney rowhouse, the cap has to be sized to the actual chimney top, which often serves more than one flue. We fit caps from Olympia Chimney and Famco, matched to the stack rather than picked off a shelf.

Cap Replacement in Olney
Old caps rust, warp or get knocked loose, and a single-flue cap on a shared stack leaves the neighbor’s opening unsealed. When we replace a cap in Olney, we check both openings so rain and animals aren’t diverted into the adjoining chimney. If a cap is salvageable, we’ll say so rather than sell a new one.

Crown Repair in Olney
The crown is the concrete wash at the top of the stack, and it’s the part that takes the most freeze-thaw punishment on Olney’s exposed rowhouse tops. When it spalls through, meltwater tracks down beside the clay tile liner and shows up as damp in an adjoining unit. We rebuild crowns with a proper overhang and seal the flashing, which is where most leaks actually start.

Crown Coating in Olney
Not every crown needs a full rebuild. Where the concrete is sound but starting to crack, a crown coating from Gelco can seal the surface and buy years before a rebuild is needed. We tell Olney homeowners plainly when coating will hold and when it won’t, because a coating over a failing crown just hides the problem for a season.
Trusted Brands We Service in Olney
We work with professional-grade product lines the chimney trade actually relies on: DuraFlex for liners, HeatShield for ceramic liner repair, Olympia Chimney and Famco for caps, Gelco for crown coatings, and Copperfield. These are the brands credentialed chimney technicians specify, not what you’d find at a big-box store. We don’t claim to stock parts locally, since our work is per job, but we can usually get the right cap or crown material to an Olney address within a normal project timeline. The written estimate tells you exactly which product is going on your chimney.
Common Chimney Cap & Crown Problems We See in Olney Homes
- Spalled crowns on exposed rowhouse tops. Philadelphia’s freeze-thaw winters break down the concrete crown faster than most homeowners expect. When it goes, water runs down beside a shared clay tile liner and turns up as a damp patch in the unit next door.
- Single-flue caps on shared stacks. A cap sized for one flue leaves the neighbor’s opening wide open, so rain and animals get into the adjacent chimney instead. On Olney’s party-wall stacks this is one of the most common mistakes we correct.
- Cross-contamination from an adjoining appliance. When a neighbor’s gas or oil furnace vents into the same shared stack, exhaust and odors can push back through a nearby damper during the heating season. It’s a venting problem, not a mystery smell.
- Aging parging and partially relined flues. Decades-old coal-to-gas conversions left behind deteriorating parging and clay tile that may have been relined once already. The crown and cap work should account for the liner’s condition, not just the top of the stack.
See the difference
Before
After
Before
After
Before
AfterThe Shared Stack Reality of Olney Rowhouse Chimneys
Here’s the thing about Olney that a generic chimney page won’t tell you: on many of these blocks the chimney stack is shared masonry serving two adjoining homes. That changes the job before it even starts. A crown or cap replacement on one address can require the neighboring owner’s permission and roofline access, because the stack straddles the party wall and both flue openings are part of the same structure. Homeowners used to detached suburban houses are often surprised by this. A qualified local pro will inspect both flue openings, confirm whether the neighbor’s appliance vents into the same stack, and check the smoke chamber and damper for cross-contamination before rebuilding the crown with a proper overhang and sealing the flashing. Then comes a multi-flue cap sized to the whole shared chimney top, not just one flue. Doing it any other way leaves half the stack unprotected. If you’re in an Olney rowhouse and want to understand exactly what your shared stack needs, our chimney cap & crown team walks you through it with photos before anything gets booked.
Pricing for Chimney Cap & Crown in Olney, PA
Typical Olney estimates run $250 to $600 for a standard cap installation and $400 to $1,200 for a crown repair or rebuild, with crown coating landing around $300 to $700 depending on the surface area. A custom or multi-flue cap for a shared rowhouse stack often falls in the $500 to $900 range because it’s sized to more than one opening. What moves the number: how much of the crown has spalled, whether flashing needs redoing, and whether the stack is shared and needs coordinated access. The written estimate sets the final price, and the estimate itself is free. We won’t recommend a rebuild if coating will hold.
We Also Serve Cities Near Olney
We also work in Cheltenham Village, Hunting Park, Frankford and Fox Chase, along with the rest of the Olney area and surrounding neighborhoods. If you’re not sure whether your address falls in our coverage, give us a call and we’ll tell you straight. The same camera inspection and photo report goes with every job, in Olney or a neighboring town.
Serving Olney, PA – Our Local Coverage Area
We serve Olney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Olney
Yes, in most cases you do. Because the stack is shared masonry straddling a party wall, a new cap or crown on your side often means roofline access over or beside the neighbor’s property, and the scope has to account for both flue openings. A qualified local pro will flag this early so you’re not surprised mid-job. Call (833) 962-9222 and we’ll explain what your specific stack needs.
It’s cross-contamination: your neighbor’s gas or oil appliance is venting into the same shared stack your fireplace uses, and exhaust is pushing back through a nearby damper during the heating season. This is a venting and liner condition, not something a cap alone fixes. A proper inspection checks the smoke chamber, damper and both flue openings before deciding the remedy. Call (833) 962-9222 for an assessment.
Spalling means the concrete surface is flaking or breaking away, exposing aggregate underneath, usually after several freeze-thaw seasons. Dirt and soot wash off; spalling crumbles when you look closely at the top edge. Since a camera inspection and photos come with the estimate, you’ll see exactly what we see. Call (833) 962-9222 for a free estimate.
A multi-flue cap sized to the whole shared chimney top, not a single-flue cap fitted to one opening. On Olney’s party-wall stacks, a single-flue cap leaves the neighbor’s flue unsealed and lets rain and animals in. We fit multi-flue caps from Olympia Chimney and Famco matched to the actual dimensions. Call (833) 962-9222 and we’ll measure on the estimate.
Yes. Even occasional wood burning builds creosote over the deep winter heating season, and in an Olney rowhouse the crown and liner condition matters as much as what’s inside the flue. A spring inspection catches spalling crowns and cross-contamination before the next heating season. Call (833) 962-9222. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
If you’re in Olney and your chimney cap or crown needs attention, call (833) 962-9222 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a camera inspection, photos you can review yourself, and a written scope before anything is booked – and we’ll tell you honestly when work can safely wait.
Written by the team at Chimney Sweep Frankford.