Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Millbourne
If your chimney cap is rusted through or the crown is cracking along the top of the stack, we handle cap and crown work for homeowners throughout Millbourne. This is a small borough, and we know how these roofs are built: brick rowhouses and twins packed close, chimneys that share a party wall, and caps that were never sized right for the stack. Our technicians have up to 15 years of experience, we give a flat price you agree to before we book, and every recommendation comes with camera evidence you can look at yourself. Call (833) 962-9222 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Millbourne Homeowners Call Chimney Sweep Frankford for Chimney Cap & Crown
We’re a chimney-and-fireplace-only company, which matters when your problem sits on a shared roofline. A general contractor looks at one cap and one crown. We look at the whole stack, including what the adjacent unit’s flue is doing. Cap and crown problems in Millbourne rarely stay in one place, and that’s the kind of thing you notice only if chimney work is all you do.
Homeowners in Millbourne call us because the diagnosis holds up. We work with professional-grade product lines such as DuraFlex, HeatShield, Copperfield, Olympia Chimney, Famco, and Gelco, chosen because credentialed chimney technicians use them, not because a big-box aisle had them on sale. Nobody on our side recommends a re-line or a rebuild off a quick glance from the ground. If a crown needs coating rather than replacement, you’ll hear that. If the liner is fine, you’ll hear that too.
Getting to Millbourne is straightforward, and we schedule around it. We’re closed Saturday, but the phone line stays open past dispatch hours and a call gets booked into the next opening. That’s how we keep response times tight for a borough where houses sit practically shoulder to shoulder.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Millbourne
Cap and crown work isn’t one job. Here’s what we actually do on Millbourne roofs, and what each one solves.
Cap Installation in Millbourne
A proper cap keeps rain, squirrels, and nesting birds out of the flue while letting smoke and combustion gases vent. On Millbourne’s 1920s – 1950s brick rowhouses, many stacks have gone decades with a rusted or missing cap, which means water has been running straight onto the flue liner. We size the cap to the actual flue opening, not to whatever fits loosely.

Cap Replacement in Millbourne
Most of the caps we replace here are the thin galvanized kind that rust through after enough wet Mid-Atlantic seasons. A stainless cap lasts far longer. When we’re up there for a replacement, we check the crown and flashing at the same time, since a leak that reads as a bad cap is often a crown problem underneath.

Crown Repair in Millbourne
The crown is the concrete or mortar cap on top of the brick that sheds water away from the stack. When it cracks, water gets into the brick and mortar below and the damage spreads. We repair crowns with proper slope and a durable seal, and we document the damage with photos first. Crown repair is one of our core services in Millbourne because these old soft-brick crowns take a beating here. You can read more about our chimney cap & crown work before you call.

Crown Coating in Millbourne
When a crown is sound but the surface is starting to break down, a flexible coating can add years before replacement is needed. It’s not the right fix for a crown that’s already cracked through, and we’ll tell you the difference. Coating also helps a repaired crown hold up through the freeze-thaw cycling that punishes these roofs.
Multi-Flue and Custom Caps in Millbourne
Shared party-wall stacks often have two or more flues side by side, and that calls for a single multi-flue cap or a custom-fabricated one sized to the whole structure. These are common in Millbourne’s rowhouses. A one-size cap over a two-flue stack leaves gaps and defeats the purpose. Custom work also comes up when a chimney’s proportions have shifted after past repairs, and the cap has to match what’s actually there.
Trusted Brands We Service in Millbourne
We install and work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – lines credentialed chimney technicians rely on for liners, caps, and restorative work. We don’t stockpile parts or promise truckloads of material on hand. What we do is order the right component for your specific stack, so the cap fits the flue and the repair matches the chimney in front of us. From an annual sweep through a crown rebuild, one specialist team handles the whole job. That’s the point of a chimney-only company: nothing gets handed off, and nothing gets guessed.
Common Chimney Cap & Crown Problems We See in Millbourne Homes
- A cracked crown passing water to the neighbor. Because Millbourne rowhouses share a continuous roofline and party-wall chimneys, a cracked crown on one unit can let water track into the adjacent flue. The first sign you might see is a rusted damper or staining in the smoke chamber next door, well before anyone climbs up to find the actual crack.
- Undersized flues after a coal conversion. Many of these homes were built for coal and later switched to gas or oil, leaving a flue larger than the appliance needs. That drafts poorly and builds creosote fast. A brush clears the first-degree layer, but glaze hides behind it, so a camera is the only way to prove what’s really in the flue.
- Spalling terracotta liners. Original clay tile liners in Millbourne’s older chimneys crack and spall from repeated freeze-thaw cycles, and without a proper cap, rain and animals get in and speed the breakdown. A camera inspection shows the liner’s real condition before anyone talks about replacing it.
- Soft-brick crowns taking on water. The humid climate here, with hot damp summers and freezing winters, accelerates spalling on the soft brick these chimneys were built from. That’s why crown maintenance matters more on Millbourne roofs than on newer construction.
There’s one local reality worth spelling out. Millbourne is a tight, densely packed borough of pre-war rowhouses and twins, and its chimneys are shared structures. When a crown fails, the diagnosis often covers two addresses even though the call came from one. In the surrounding townships, houses sit farther apart and each chimney stands alone. Not here. That’s why cap and crown work in Millbourne sometimes means talking with a neighbor about what the camera found on their side of the party wall.
A typical job runs like this: a crown has spalled and cracked after enough freeze-thaw winters, water soaks into the soft brick and mortar, and because the roofline is continuous, that moisture turns up next door as efflorescence or a rusted damper. A qualified local pro runs a Level 2 inspection with a camera to document the crown, flashing, and flue liner before recommending a crown repair, a coating, or a custom multi-flue cap sized to the shared stack. Nothing should be sold off a glance from the ground.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Millbourne, PA
These are typical estimated ranges for Millbourne, and the written estimate you get sets the final price. A standard cap installation runs roughly $250 – $550. Cap replacement sits in the same range, a bit higher for stainless or unusual sizing. Crown repair typically runs $350 – $800 depending on how much of the crown is rebuilt. Crown coating is often $200 – $450. A custom or multi-flue cap for a shared party-wall stack usually lands between $400 and $900, since it’s fabricated to fit. What moves the number is access to the roof, how extensive the cracking is, whether flashing needs work, and the size of the flue arrangement. The estimate itself is free.
We Also Serve Cities Near Millbourne
Cap and crown work takes us well beyond the borough line, into Overbrook, West Philadelphia, Penn Wynne, and Merion Station. If your chimney shares a wall with a neighbor or stands alone on a suburban lot, the approach is the same: look first, document with a camera, then recommend. Homeowners across Millbourne and these nearby towns get the same specialist attention.
Serving Millbourne, PA – Our Local Coverage Area
We serve Millbourne and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Millbourne
Yes, it can. Millbourne rowhouses share continuous rooflines and party-wall chimneys, so a cracked crown on one unit can let water track into the adjacent flue. You might notice a rusted damper or staining in your smoke chamber before anyone finds the crack itself. A camera inspection on both sides of the shared stack settles it. Call (833) 962-9222 for an exact quote, and estimates are free.
Because these older chimneys hide their worst problems from the ground. Coal-converted flues build first-degree creosote a brush can clear, but glaze hides behind it, and only a camera proves it. A crown can look intact while moisture is already in the brick. A Level 2 camera inspection documents the crown, flashing, and liner so you can see the evidence yourself before anything is recommended. Call (833) 962-9222 for a free estimate.
A single multi-flue or custom-fabricated cap sized to the whole structure, not a one-size cap dropped over each flue. Shared party-wall stacks often carry two or more flues side by side, and a loose cap leaves gaps that let rain and animals in. A custom cap is cut to match what’s actually there. Call (833) 962-9222 and we’ll quote it.
Very likely. Many Millbourne homes were built for coal and later switched to gas or oil, leaving a flue that’s oversized for the new appliance. An oversized flue runs cold, drafts poorly, and builds creosote faster. The fix might be a properly sized liner or just a corrected cap, and the camera tells us which. Call (833) 962-9222; estimates are free.
The cycle of wet winters and hot damp summers is hard on soft brick and mortar, and it accelerates spalling on both crowns and the brick below them. Water gets in, freezes, expands, and breaks the surface apart. That’s why crown maintenance and a properly fitted cap matter more here than on newer construction. Call (833) 962-9222 for an exact quote.
Get Your Millbourne Chimney Cap & Crown Checked
A cap and crown are your chimney’s front line against water, and in a shared rowhouse stack, a failure doesn’t stay contained. We’ll put a camera in the flue, document the crown and flashing, and tell you plainly whether the work can wait or shouldn’t. Nothing gets recommended without evidence you can see. Call (833) 962-9222 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Frankford.