Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Narberth
If you live in Narberth, you already know the borough is a different animal from the towns around it. Tight lots, steep roofs, and homes that have been standing since before anyone thought much about chimney codes. We handle sweeps and inspections here with that in mind, working from ladder stands and roof jacks where a truck platform won’t fit, and adapting to some of the steepest slate and standing-seam pitches on the Main Line. You’ll get a straight answer about what your chimney actually needs, backed by camera evidence you can look at yourself. Call (833) 962-9222 and we’ll get you on the schedule. Our technicians have up to 15 years of experience, and every job is a chimney job.
Why Narberth Homeowners Call Chimney Sweep Frankford for Chimney Sweep
Narberth’s housing stock is unlike a lot of what’s around it. Most of the borough went up between the late 1800s and the 1930s, but tucked behind those Victorians and Four-Squares are infill homes built after 1950, many with factory-built fireplaces and prefabricated chimneys. That mix is exactly where generalist contractors get into trouble: they sweep the flue, maybe, and never look at whether the venting matches the original manufacturer’s specifications. We work on both. Old clay-tile liners that need relining, and modern prefab chases that need their caps and chase covers checked for water intrusion. Chimney work is all we do, which means we see problems a handyman misses.
When you call, we’ll talk through what’s happening with your fireplace, then book a sweep with a flat price agreed before we arrive. Camera inspection and a photo report come with the work, so you’re not taking anyone’s word for it. Nothing gets recommended that you can’t see for yourself, and we’ll tell you plainly when a repair can safely wait. That single-source accountability matters in a borough this dense: the same specialist handles the sweep, the cap, the liner, and the rebuild if it ever comes to that. Across Narberth and the surrounding Main Line, homeowners call us because the diagnosis comes first, the price is agreed up front, and the written estimate sets the final number.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Narberth
From annual sweep to full liner rebuild, one specialist start to finish. Here’s what we do most in Narberth.
Level 1 Inspection
A Level 1 inspection is the annual read of your chimney, and it’s the right call for a factory-built fireplace that’s been looked after. We check the firebox, the damper, the flue, and the cap and chase cover, looking for cracked caps, loose flashing, and any sign water has found its way in. In Narberth’s newer infill homes, this is usually where the real story shows up: nothing looks old, but the cap has corroded or the chase has loosened while the firebox quietly rusts behind it.

Level 2 Inspection
A Level 2 inspection goes further, with camera inspection of the flue and a closer look at the venting system and its connections. It’s what we recommend when you’ve just bought a Narberth property, when a factory-built fireplace shows a weak draft or a damper that won’t seal, or when the chimney has been through any change. We photograph what we find and hand you the report, because the decision ahead of you should rest on what’s actually there, not on a sales pitch.

Creosote Removal
Creosote builds up whether the fireplace looks new or a century old, and a glazed, tar-like layer is the kind that fuels a chimney fire. In Narberth’s humid summers, the shoulder-season damp also drives creosote odor back down an unheated flue, which is why a flue that smelled fine in March can smell wrong by October. We remove creosote with proper sweeping tools and tell you the stage we found, from soot to glaze, so you know where you stand. If a chemical treatment is needed for a hard glaze, we’ll say so before we start.

Soot Removal
Soot and ash collect in the firebox and smoke chamber, and it’s not just a mess; it’s a sign of how the system is drafting. We clear it out, check the smoke shelf, and confirm that airflow is heading where it should. For a factory-built unit in a newer Narberth home, that means confirming the firebox components match the manufacturer’s specs rather than assuming the generic parts left behind will do. Soot removal is the housekeeping; confirming the venting is the real work.
Trusted Brands We Service in Narberth
We work with the brands chimney pros rely on, including DuraFlex, HeatShield, Olympia Chimney, and Famco. If your Narberth home has a factory-built fireplace that takes manufacturer-specific venting, we’ll identify what’s there and match it before recommending any replacement cap or flue liner. We don’t source from big-box shelves; the parts have to fit the system, not the other way around. HeatShield is worth calling out: it’s a ceramic liner repair process that restores a failing flue rather than replacing it, and it’s a capability most sweep-only companies simply don’t have. Turnaround on standard parts is quick, and we’ll tell you up front if something has to be ordered. If you’re not sure what brand is in your chimney, that’s normal. We’ll find out.
Common Chimney Sweep Problems We See in Narberth Homes
The issues that come up most in Narberth aren’t the ones you’d expect from a borough this old. The newer homes bring their own set of them.
- Factory-built fireplaces nobody’s ever inspected. A fireplace that looks new in a 1980s or 1990s Narberth infill home still needs an annual inspection, because a cracked cap or loose flashing can let water in for years before the firebox rusts through.
- Mismatched aftermarket parts. Generic caps and liners get installed because they fit the opening, not the manufacturer’s specifications. That leads to weak draft, premature failure, and a venting system the original design never called for.
- Water intrusion through the prefabricated chase. In Narberth’s tight lots, a failed chase seal goes unnoticed until the firebox rusts. There’s no visible puddle, no obvious leak, just a slow decay behind the wall.
- Creosote and soot in an older flue that’s been converted to gas. The borough’s pre-1930s homes often ran a coal furnace and a fireplace on separate flues. Many were converted to gas over the years, leaving an unlined or inadequately lined flue that needs relining or capping before safe wood or gas use.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Narberth, PA
A typical annual sweep in Narberth runs $180 – $280, and a Level 1 inspection is usually folded into that price. A Level 2 inspection, with the flue camera and photo report, typically runs $250 – $450 depending on the number of flues and how much of the chase needs to be accessed. Creosote removal with a hard glaze sits higher, around $300 – $500 when a chemical treatment is called for. Soot removal in a standard firebox runs $150 – $250. If the inspection turns up a cap or chase cover replacement, those are quoted separately once we know the dimensions and the manufacturer’s spec. The written estimate sets the final price, nothing’s added after the fact, and estimates are free. Call (833) 962-9222 and we’ll talk through your situation before we book.
We Also Serve Cities Near Narberth
We work across the towns around the borough too: Merion Station, Penn Wynne, Overbrook, and Millbourne. The same tight-lot, mixed-age housing stock runs through all of them, and the same factory-built and prefabricated chimneys we see in Narberth’s newer infill homes show up on those streets as well. If you’re just outside the borough line, our chimney sweep service covers the same work in your area.
Serving Narberth, PA – Our Local Coverage Area
We serve Narberth and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Narberth
Yes, a factory-built fireplace needs the same annual inspection as a masonry chimney. The venting and cap are still subject to creosote buildup, and the prefabricated cap and chase cover corrode over time whether the fireplace gets much use or not. An annual Level 1 inspection catches a cracked cap or loose flashing before water has a chance to rust the firebox. If your factory-built unit hasn’t been looked at in years, call (833) 962-9222 for an exact quote. Estimates are free.
A Level 1 inspection is the visual check of the accessible parts of the chimney and firebox, and it’s the right call for an annual sweep on a fireplace that’s been maintained. A Level 2 inspection adds a camera inspection of the flue, a closer look at the venting connections and the chase, and it’s the one to book when the fireplace is new to you, when a damper won’t seal, or when the draft is weak. For factory-built units, the extra step is usually where the real problem shows up. Call (833) 962-9222 and we’ll tell you which one fits your situation. Estimates are free.
Yes, we work with DuraFlex, HeatShield, and Olympia Chimney, along with Gelco and Famco when those are what the system calls for. The point isn’t the brand name; it’s matching the replacement part to the original manufacturer’s specifications so the venting performs the way it was designed to. HeatShield gives us the option to restore a failing flue rather than replacing it in some cases. Call (833) 962-9222 and we’ll identify what’s in your chimney before recommending anything. Estimates are free.
In Narberth, the usual culprit is the prefabricated cap and chase cover taking on water from wet shoulder seasons and freeze-thaw winters, which ages the metal faster than the fireplace itself. A cap that wasn’t matched to the manufacturer’s spec can also fail early. The fix isn’t a generic replacement from a hardware shelf; it’s a cap and chase cover that fit your venting system properly. We’ll inspect the chase and photograph what we find before quoting. Call (833) 962-9222. Estimates are free.
You can’t confirm creosote buildup just by looking at the firebox, so the reliable answer is a sweep and inspection. In Narberth, the shoulder-season damp brings creosote odor back down an unheated flue, which is the most common sign a sweep is overdue. A glazed, tar-like layer is the dangerous stage, and no fireplace should burn on top of it. Call (833) 962-9222 and we’ll sweep the flue and tell you exactly what stage the creosote is in. Estimates are free.
What Happens When You Call
When you call, we’ll ask what your fireplace is doing, then book a sweep with a flat price agreed before we come out. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We answer 24/7. Fast dispatch, 7am-7pm. We’re closed on Saturday. Camera inspection and a photo report come with every sweep, nothing’s recommended without evidence you can see, and the written estimate sets the final price. Serving Narberth and the towns around it, we’re a chimney-and-fireplace specialist and nothing else. Call (833) 962-9222 for a free estimate.
Written by the team at Chimney Sweep Frankford.