Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Narberth
Chimney repair in Narberth usually means one of two things: rehabbing century-old masonry on a borough Victorian, or tracking down a brand-specific part on a factory-built fireplace in a newer infill home. Both jobs land on our bench most weeks. We know the tight lots off Haverford and Narberth Avenues, the steep slate and standing-seam roofs, and the way a prefab chase cover can look fine from the driveway while water is quietly finding its way into the damper. One specialist handles the sweep, the diagnosis, the parts, and the rebuild. Call (833) 962-9222. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Narberth Homeowners Call Chimney Sweep Frankford for Chimney Repair
Chimney work is the whole job here, not a side line. That focus matters in Narberth because a repair call on a 1920s Four-Square and a repair call on a 1990s teardown-replacement home send you down completely different diagnostic paths. We see problems a general contractor misses because they only touch chimneys between roofing and gutters. The brands on our worklist – HeatShield, Gelco, Olympia Chimney, Famco, DuraFlex, Copperfield – are the product lines credentialed chimney technicians actually specify, not whatever a big-box aisle happens to stock. Our technicians have up to 15 years of experience, and they work from ladder stands and roof jacks on the narrow lots rather than assuming a full platform will fit.
We serve Narberth and the surrounding Main Line, and homeowners here call us back because the diagnosis holds up. Nothing gets recommended without camera evidence you can see for yourself. If the fix is a $40 cap, we say so. If the flue collar is loose and the chase needs resealing, that’s what the report shows. Estimates are free and the price is set per job by the written estimate, so there are no surprises after the ladder comes down.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Narberth
The repair work below covers most of what we handle in the borough. Where a fix depends on a manufacturer’s part, that’s where we start.
Flashing Repair
Flashing is where most “chimney leaks” in Narberth actually begin. On the steep slate and standing-seam roofs common here, the step flashing and counter-flashing take a beating from freeze-thaw movement, and a small gap at the roofline lets water track down into the attic or the smoke chamber. We reset and reseal the flashing properly rather than smearing sealant over the symptom, because the repair has to survive the next hard winter.

Chimney Waterproofing
Southeastern PA’s humid summers and freeze-thaw winters are hard on the soft old brick in Narberth’s chimneys. Waterproofing is a breathable treatment that keeps liquid water out while letting the masonry dry from the inside. It matters most on the original brick chimneys that have already started to pit, and it’s the cheapest way to slow spalling before it becomes a rebuild.

Chimney Rebuilding
When the crown is gone, the top courses are crumbling, or a factory-built chase has failed structurally, rebuilding is the honest answer. For masonry chimneys we rebuild from the roofline up to a sound course, then cap and crown it. For prefab chases, we assess whether the chase cover and flue components can be replaced with the correct brand parts before anyone talks about demolition.

Mortar Repointing and Tuckpointing
Old mortar joint failure is the most common call on Narberth’s pre-1930s homes. Repointing replaces the crumbling mortar between the bricks with a matched mix; tuckpointing does the same job with a finer finish that mimics the original look. Both stop water from getting behind the brick, which is where the real damage starts.
Spalling Brick Repair
Spalling – brick faces flaking and popping off – is what happens when water gets in and freezes repeatedly. We cut out the failed bricks, replace them with matching units, and treat the surrounding masonry so the same section doesn’t fail again the following season.
Trusted Brands We Service in Narberth
Prefab fireplaces are only as good as their original parts, and in Narberth those parts are rarely documented. We work with DuraFlex, Olympia Chimney, and HeatShield for liners, caps, and liner restoration, and we identify the original manufacturer’s component before we replace anything so the fix actually matches the appliance. We don’t claim to hold local parts inventory; instead, we source the correct brand part and get it installed, which is faster and more reliable than forcing a generic cap onto a specific chase. If your factory-built fireplace needs a brand-specific collar or cap, that’s exactly the kind of job we take.
Common Chimney Repair Problems We See in Narberth Homes
These four failure modes account for a large share of the calls we get in Narberth, and three of them live on newer homes.
- Uncovered factory-built chase tops. A missing or damaged chase cover lets rain and animals straight into the flue, which shows up as draft problems and odor rather than a visible leak. It’s one of the easiest repairs to miss from the ground.
- Loose or missing flue liner collars. In prefab fireplaces, a collar that has worked loose lets smoke leak into the smoke chamber and out into the room. You’ll often notice staining at the damper before you notice anything else.
- UV-degraded plastic or thin-metal caps. Newer homes often have caps that crack and admit water, which mimics a masonry leak and sends homeowners looking in the wrong place. The cap is the first thing to check.
- Spalling and mortar failure on old brick. On the borough’s Victorian and Tudor chimneys, the soft original brick and mortar pit and crumble from years of freeze-thaw. This is the classic Narberth masonry repair, and it’s progressive if left alone.
Here’s how a typical prefab job usually goes, since it’s the newer-home scenario people ask about most. A factory-built fireplace develops a draft problem or shows creosote staining at the damper because the chase top is missing its manufacturer-specific cap or the flue liner collar has worked loose. Neither is visible from the ground. A qualified technician runs a Level 2 inspection with a camera to identify the appliance and its parts, then reseals or replaces the cap and collar with the correct brand replacement. Done right, that avoids a full masonry rebuild entirely.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Narberth, PA
Chimney repair pricing in Narberth runs from a modest repair to a full rebuild, and the spread reflects the borough’s housing. A typical flashing repair runs $250-$550. Chimney waterproofing of a single flue is usually $300-$600. Mortar repointing lands around $600-$1,800 depending on how much of the stack is involved, spalling brick repair runs $400-$1,500, and a partial chimney rebuild ranges $2,500-$7,000. On the newer side, replacing a brand-specific chase cover or flue collar typically falls in the $350-$900 range because it’s parts and labor rather than masonry. What moves the number is access on the tight lots, roof pitch, and how far the damage has spread. Every estimate is free, and the written estimate sets the final price. Call (833) 962-9222 for an exact quote.
We Also Serve Cities Near Narberth
We handle chimney repair calls across the surrounding Main Line and Philadelphia neighborhoods, including Merion Station, Penn Wynne, Overbrook, and Millbourne. If you’re just outside the borough line, the same team covers you, and our chimney repair work runs the full range from cap replacement to structural rebuild. Reach out with your address and we’ll confirm coverage.
Serving Narberth, PA – Our Local Coverage Area
We serve Narberth and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Narberth
Because factory-built fireplaces fail in ways that stay hidden from the ground, even when nothing looks old. Narberth’s post-1950 infill and teardown-replacement homes often have prefab fireplaces whose flue collars, caps, and chase covers are brand-specific and rarely documented, so a missing cap or a loose collar can create draft and odor problems you’d never guess at from the driveway. A camera inspection finds it. Call (833) 962-9222 for an exact quote; estimates are free.
A Level 1 is a basic visual check of the accessible parts of the system; a Level 2 adds a camera run through the flue and access to areas a basic check can’t see. For a prefab fireplace with a suspected collar or chase problem, the Level 2 is what identifies the appliance and its parts. That’s the inspection we recommend when there’s a draft complaint, staining, or a recent home purchase. Call (833) 962-9222 to book one.
Yes, and that’s usually the right first repair on a newer prefab in Narberth. The key is matching the manufacturer’s specific cap or chase cover to the appliance rather than forcing a generic part, which is where brand knowledge matters. We identify the original component, source the correct replacement, and reseal it correctly. Call (833) 962-9222 and we’ll confirm what your system needs.
Humid summer air moving down an unsealed or uncovered flue is the usual cause, and it carries the creosote odor back into the room. In Narberth, a missing or cracked chase cap is a frequent culprit, and so is a loose flue collar letting air in. It’s a fixable problem, not something you have to live with all season. Call (833) 962-9222 for an exact quote; estimates are free.
Once a year is the standard, and it matters as much on a newer prefab as on an old masonry stack. The parts degrade quietly – caps crack, collars loosen, chase covers fail – and a yearly check catches them before they turn into a rebuild. If you’ve just bought an older Narberth property, start with a full assessment before the first fire. Call (833) 962-9222; we answer 24/7.
Get Your Narberth Chimney Repaired Right
Whether it’s a crumbling mortar joint on a Haverford Avenue Victorian or a missing chase cap on a newer Narberth prefab, one specialist handles the sweep, the diagnosis, and the repair from start to finish, using parts and materials from the brands chimney pros rely on. Nothing gets recommended that the camera doesn’t show, and you’ll hear plainly when a fix can safely wait. Call (833) 962-9222 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Frankford.