Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Hunting Park
If your chimney is leaking, spalling, or drafting poorly, you’re in the right place. We handle chimney repair in Hunting Park as a dedicated chimney-and-fireplace specialist, which matters on these tightly packed rowhouse blocks. A cracked crown or a parged-over flue in one unit can quietly affect the venting next door, and a generalist often misses that. We know how these attached 1920s brick stacks are put together, and we diagnose the whole system before anyone touches a trowel. Our technicians have up to 15 years of experience. Call (833) 962-9222 for a free estimate.
Why Hunting Park Homeowners Call Chimney Sweep Frankford for Chimney Repair
Chimney work is all we do, so we see the rowhouse failures other trades walk past. In Hunting Park, that means understanding shared stacks, party-wall chimneys, and flues that were built for coal and later oil furnaces and then sealed or relined without much thought for the gas appliance or wood insert feeding into them today. We work with the brands chimney pros rely on, including HeatShield and Olympia Chimney, because restorative liner work here is the rule, not the exception.
Our response into Hunting Park is quick, and the visit starts with a camera inspection and a photo report you can see for yourself. Nothing gets recommended that the footage doesn’t show. That matters when a homeowner has been told they need a full rebuild and has no way to verify it. And we can safely tell you when a repair can wait. Estimates are free and the price is set per job by the written estimate, agreed before any work is booked.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Hunting Park
From a repointed mortar joint to a rebuilt stack, our chimney repair team covers every phase of the job so you aren’t juggling a mason and a sweep. Here’s what we most often handle on Hunting Park’s attached brick blocks.
Mortar Repointing
Hunting Park’s exposed chimneys take decades of freeze-thaw cycles, and mortar joints are the first thing to go. Repointing cuts out the soft, crumbled mortar and replaces it with fresh material that moves with the brick instead of letting water sit in the joint. On a party-wall stack, this has to be done without disturbing the adjoining flue.

Spalling Brick Repair
Spalling is where the brick face flakes and falls away, usually after water gets in and freezes behind it. Left alone, it spreads. We replace the spalled units and address the water source that caused them, because replacing brick without fixing the leak just buys you a few more winters.

Chimney Waterproofing
Philadelphia’s humid summers and nor’easters drive water into hairline cracks that are invisible from the ground. A breathable waterproofing treatment keeps storm water out while letting the masonry dry from the inside, which is what stops the rusted dampers and blocked flues we find below.

Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the spot most likely to leak on these rowhouses. Failed flashing sends water down into the brick and the ceiling. We repair or replace it with proper counter-flashing and step flashing seated against the masonry, not just sealed over with caulk.
Trusted Brands We Service in Hunting Park
We install and work with professional-tier product lines chosen by credentialed chimney technicians, not sourced from big-box stores. That includes HeatShield for ceramic liner repair, DuraFlex and Olympia Chimney liners sized to the appliance, and Gelco caps and components. Because these are the materials we work with day in and day out, we can match the right liner, cap, or repair method to your flue rather than fitting whatever is on a shelf. If a full reline is genuinely required, we say so; if HeatShield restorative repair will solve it, we say that instead. Fast turnaround, and one specialist handling the job start to finish.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Hunting Park Homes
The single most important thing to understand about Hunting Park is this: its rowhouse chimneys frequently stack multiple flue tiles in one shared masonry stack. A repair on one unit’s flue is only correct once we’ve confirmed the neighboring flue still drafts and hasn’t been cross-vented by a displaced or parged-over tile. Isolation, not just sealing, is the repair standard on these attached blocks. Here’s what that looks like in practice.
- Cross-contamination in a shared stack. One unit’s flue gets relined or capped without anyone checking the neighbor’s flue tile, and an adjacent appliance ends up venting into the wrong channel. We verify isolation on both sides of the stack before calling a job done.
- Parging over original coal-era tiles. Sealing a leaky flue with a coat of parging stops the water but chokes draft for the modern gas appliance or wood insert the flue was never sized for. A flue that was fine for coal is often the wrong size for today’s equipment.
- Crown and flashing failures on exposed party-wall stacks. Winter nor’easters and heavy summer thunderstorms drive water into spalled brick, rusting dampers and blocking flues below. On packed rowhouse blocks, a blocked flue can affect adjacent units, so we trace the water back to its entry point.
- Deteriorated mortar joints from decades of freeze-thaw. The brickwork on these 1920s-era chimneys shows its age, and soft joints let in the water that starts the whole cycle. Repointing early is cheaper than rebuilding later.
Pricing for Chimney Repair in Hunting Park, PA
Here’s what chimney repair typically runs in the Hunting Park market. A typical mortar repointing job on a rowhouse chimney runs $400 – $1,200 depending on how much of the stack is affected. Spalling brick replacement usually falls in the $350 – $900 range. Chimney waterproofing is commonly $250 – $600 for a treatment on an exposed stack. Flashing repair runs about $300 – $800, and a partial chimney rebuild can range from $1,800 up past $5,000 when a shared stack has structural damage. These are estimates. The written estimate you receive after the camera inspection sets the final price, and it’s free. Call (833) 962-9222 for an exact quote.
We Also Serve Cities Near Hunting Park
Hunting Park sits among some of the city’s densest rowhouse neighborhoods, and we work the same shared-stack conditions in the towns around it. If you’re just outside Hunting Park, we also serve Olney, Kensington, Port Richmond, and Frankford, with the same camera-first inspection and written estimate. Same specialist, same approach to attached flues and party walls.
Serving Hunting Park, PA – Our Local Coverage Area
We serve Hunting Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Hunting Park
We keep response into Hunting Park quick, usually booking the next available opening. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 962-9222 to get on the schedule, and estimates are free.
Yes, we cover Hunting Park block to block, including the attached rowhouse streets where flues share a stack. That shared-stack knowledge is the whole reason people call us here. If you’re near Olney, Kensington, Port Richmond, or Frankford, we work those too.
Same-day service is often possible when the work and scheduling allow. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. Call (833) 962-9222 and we’ll tell you honestly what we can book.
Not meaningfully. Hunting Park pricing tracks the surrounding city market, and the shared-stack rowhouse work here is priced the same way we’d price it in Olney or Kensington. What drives the number is the actual condition of the stack, not the neighborhood. The written estimate after the camera inspection sets the final price. Call (833) 962-9222 for an exact quote.
A camera inspection is how you know. Creosote that has glazed onto the flue walls, or built up heavily, won’t come off with a standard sweep and may call for a different method. We show you the footage and explain what we see before recommending anything, so you can judge it yourself. Call (833) 962-9222 for a free estimate.
Chimney work is all we do, which means we see problems generalists miss on these attached Hunting Park blocks. From annual sweep to full liner rebuild, it’s one specialist, start to finish, with a camera report in your hands and a flat price agreed before we book. Call (833) 962-9222 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Frankford.